Study on the Lower Head Failure in Severe Accidents Part II: Thermal-mechanical Coupling Behavior Analysis on CAP1400 Reactor Lower Head
Hao Yang,Pengcheng Gao,Bin Zhang,Sheng Cao,Jishen Li,Fan Miao,Shaowei Tang,Jianqiang Shan
DOI: https://doi.org/10.1016/j.anucene.2024.110680
IF: 1.9
2024-01-01
Annals of Nuclear Energy
Abstract:Under severe accident conditions with core meltdown, large amounts of molten material relocate to the lower head at high temperatures. Significant thermal and mechanical loads may lead to failure of the reactor pressure vessel (RPV) lower head, spreading radioactive fission products. Lower head failure time and location are crucial for accident mitigation and consequence assessment. This study developed a thermodynamic failure analysis model for the lower head by investigating material failure mechanisms, coupling this into an Integrated Severe Accident Analysis code (ISAA), and conducting experimental validation and applied research. Part I mainly introduces the thermodynamic analysis module development, validation against OLHF experiments, and preliminary failure criteria analysis. Results indicate the model accurately predicts lower head failure behavior, and Larson -Miller life fraction and Hedl-Dorn parameter criteria accurately assess lower head integrity. Part II presents applied research after validation and preliminary analysis. Using the improved ISAA, melt pool behavior and lower head thermal -mechanical response were analyzed for a CAP1400 small break loss -of -coolant accident (SBLOCA), assuming multiple safety system failures. Results indicate the bottom of the lower head melt pool didn 't form a hard shell due to high heat release rate, only an oxide shell layer around the second layer. Decay heat from melt pool components cannot be dissipated, leading to lower head failure. Further External Reactor Vessel Cooling (ERVC) heat transfer model analysis and research are needed in ISAA. The two developed mechanical analysis models predict material failure at high temperatures, and the timing and location of lower head failure are consistent, at approximately 16,000 s at 25.38 degrees +/- 5.47 degrees on the lower head. The predicted failure mode is similar to Part I validation, indicating both Larson -Miller life fraction and Hedl-Dorn parameter criteria provide consistent lower head integrity judgments.