Abstract:As the key component of the steam turbine, the steam turbine blade needs to work in a complex and rigorous operating environment, which easily leads to blade cracks or even fractures and other faults. Excessive vibration is one of the main causes of blade failure, which may affect the safe and stable operation of the equipment. Therefore, it is significant to detect and analyze blade vibration characteristics. Blade tip-timing (BTT) technology has the advantages of non-contact and simple installation, which is widely used in online blade vibration monitoring of turbomachinery. In this paper, the research of using BTT technology to measure the vibration characteristic parameters of the last stage moving blade of a steam turbine with integral shroud and snubber is carried out. Firstly, a finite element model of the last stage blade is built, the stress distribution and mode shape of the blade are obtained through simulation analysis. Secondly, the blade vibration measuring experiment is accomplished on a dynamic balancing test-bed, and the synchronous vibration parameters such as resonance speed are calculated correctly under lowing speed working condition based on BTT technology. Furthermore, the strain gauge method is used simultaneously to verify the accuracy of the measurement results. The resonance frequency and engine order of the blade are measured successfully. The analysis results show that parameters such as resonance speed identified by BTT method are consistent with that measured by strain gauge method. The research results prove the effectiveness of BTT technology in measuring the vibration parameters of the last stage blade with integral shroud and snubber, which can provide reference for design rationality verification and vibration characteristics detection of the steam turbine blade.

NUMERICAL MODEL FOR VIBRATION CHARACTERISTIC OF STEAM TURBINE BLADE WITH DAMPED SHROUD

Optimal Design for Damper of Long Blade in Steam Turbine Based on Dynamic Analysis

Numerical Model And Optimization For Dynamic Characteristic Of Damping Blade

NUMERICAL MODEL AND OPTIMIZATION FOR DYNAMIC CHARACTERISTIC OF LONG BLADE WITH FRICTION DAMPER

Research on Vibration Characteristics of Last Stage Blade Based on Blade Tip-Timing Technology

Study on Discrete Modeling Method of Modal Testing for Turbine Blade

Study on the Forced Torsional Vibration Response of Multiple Rotating Blades with Underplatform Dampers

Research on Boundary Conditions of T Steam Turbine Blade by Finite Element Model Analysis

The Dynamic Modeling and Numerical Simulation of Long Turbine Blades Group That Has the Dry Friction Damping Structure

Dynamic Response Analysis of Blades with Damping Structures of Shroud and Snubber

Experimental Friction Damping Characteristic Of A Steam Turbine Blade Coupled By Shroud And Snubber At Standstill Set-Up

Investigation of Vibration Characteristics for Dry Friction Damped Blades with High-fidelity Finite Element Model

The Vibration Characteristics of Steam Turbine Blades with New Friction Damping Structures

Experimental Study on Vibration Characteristics of Blade with New Damping Structure

Experimental Study on Vibration Characteristics of Dry Friction Damping of Turbine Blade with Integral Shroud

Study on Vibration Characteristics of Damping Blade with Snubber and Shroud Based on Fractal Theory

Study on Optimization for Strength and Vibration Characteristics of Turbine Blade with Complex Damping

ICOPE-15-1182 Study on Response of Turbine Damping Blade Based on Finite Element Method with Microslip Model

Dynamic response analysis of shrouded blades under impact-friction considering the influence of passive blade vibration

NUMERICAL INVESTIGATIONS OF THE LONG BLADE PERFORMANCE USING RANS SOLUTION AND FEA METHOD COUPLED WITH ONE-WAY AND TWO-WAY FLUID-STRUCTURE INTERACTION MODELS

Study on Service Life of Last Stage Blade with Damped Structure in Large Power Steam Turbine