Abstract:Muon imaging technology has developed rapidly over the past decades with extensive applications. In many cases, plastic scintillator detectors are preferred because of their high cost performance, ease of processing and robustness in harsh environments. To reduce imaging time and improve imaging quality, detectors tend to have large areas and high position resolutions. The challenge to the electronics for such detectors is to maintain the scale of electronics acceptable while improving the high position resolution of the detector. In this paper, the basic detector unit is a triangular strip of plastic scintillator, each embedded with two wavelength-shifting (WLS) fibers read out by the silicon photomultipliers (SiPMs). Since the hit position of muon on the detector is determined by the splitting ratio of the scintillation light on two adjacent scintillator strips, it is necessary the readout electronics has high linearity and low noise. The possibility of the electronics channel multiplexing on the same detector plane is fully explored so that four WLS fibers can be read out by one SiPM realizing 2:1 readout channel compression. Furthermore, since multiple electronics modules are connected by a daisy chain structure, the electronics system is very scalable with its data acquisition system (DAQ) independent of detector size. In addition to detailing the position encoding readout scheme, the design of electronics module and the DAQ system, the electronics system has been implemented and applied to a prototype detector for performance evaluation. Using scintillator strips with 11 mm pitch size, the position resolution of the detector reaches 1.49 mm, which demonstrates that the designed electronics is suitable for the new detector structure, and the combination of the two has a good application prospect in muon imaging.

Design on Data Acquisition System for High Density Plastic Scintillator Detector

Design of Multi-channel Front-end Readout Electronics Applied for New Plastic Scintillator Array Detector

Design and implementation of a ground detection system for HERD-TRD front-end electronics

Design and Implementation of High Performance DAQ System for IRFPA Testing

Software Design Of Electronics Tests And Data Acquisition For A New Gas Detector

Data Acquisition System for CEPC Vertex Detector Prototype

Design and preliminary performance of a novel mixed-signal front-end electronics with post digital shaping for CZT detectors

Design of a Common High-Performance Data Acquisition System for Physics Experiments at HIAF

Development of Front-End Readout Electronics for Silicon Strip Detectors

Preliminary Design of a FADC Readout System for the Alpha/Beta Discrimination in a Large Area Plastic Scintillation Detector

Readout Electronics Design for a Cosmic Ray Muon Imaging System

Electronics design for a muon imaging system using triangular plastic scintillators with WLS fiber readouts

Design of a high-speed multi-channel data acquisition system based on FPGA

Design of digital nuclear signal processing system for CdZnTe detector

Design of long-distance and large-dynamic-range of charge measurement circuit

Design of the Testing Software System for Front End Electronic Modules in LHAASO WCDA

Design of Data Acquisition System for 2D - ARRAY Ionization Chamber Detector

Design of the Data Acquisition System for the HERD Transition Radiation Detector Prototype

Research on Data Acquisition System for CZT Detector Based SPRD

Data Acquisition Software for a Prototype of LET Spectrometer

A Main Amplifier Circuit and Data Acquisition System for Charged Particle Detector Array