Abstract:Storage is still limiting the implementation of hydrogen as an energy carrier to integrate the intermittent operation of renewable energy sources. Among different solutions to the currently used compressed or liquified hydrogen systems, physical adsorption at cryogenic temperature in porous materials is an attractive alternative due to its fast and reversible operation and the resulting reduction in storage pressure. The feasibility of cryoadsorption for hydrogen storage depends mainly on the performance of the used materials for the specific application, where metal-organic frameworks or MOFs are remarkable candidates. In this work, gravimetric and volumetric hydrogen uptakes at 77 K and up to 100 bar of commercially available MOFs were measured since these materials are made from relatively cheap and accessible building blocks. These materials also show relatively high porous properties and are currently near to large-scale production. The measuring device was calibrated at different room temperatures to calculate an average correction factor and standard deviation so that the correction deviation is included in the measurement error for better comparability with different measurements. The influence of measurement conditions was also studied, concluding that the available adsorbing area of material and the occupied volume of the sample are the most critical factors for a reproducible measurement, apart from the samples’ preparation before measurement. Finally, the actual volumetric storage density of the used powders was calculated by directly measuring their volume in the analysis cell, comparing that value with the maximum volumetric uptake considering the measured density of crystals. From this selection of commercial MOFs, the materials HKUST-1, PCN-250(Fe), MOF-177, and MOF-5 show true potential to fulfill a volumetric requirement of 40 g·L−1 on a material basis for hydrogen storage systems without further packing of the powders.

Study on State Equation for Hydrogen Storage Measurement by Volumetric Method

Thermodynamics Study of Hydrogen Storage Materials

Study on real-gas equations of high pressure hydrogen

Study of Equation of State of the Dense Fluid He+H_2 Mixtures

Equation Of State And Transport Properties Of Warm Dense Helium Via Quantum Molecular Dynamics Simulations

Progress in Improving Thermodynamics and Kinetics of New Hydrogen Storage Materials

Numerical Study of Hydrogen Leakage and Explosion in Hydrogen Refueling Station with Large Volume Hydrogen Storage Vessels

Measurement of Multiple Physical Parameters of Dense Gaseous Hydrogen-Deuterium Mixture under Double-Shock Compression: Evaluating Theoretical Models from Multiple Views

Theoretical and Experimental Study for Static Evaporation Rate of a Self-Developed Liquid Hydrogen Storage Tank

Dynamics of Hydrogen Storage through Adsorption: Process Simulation and Energy Analysis

Numerical simulation and optimization analysis of low temperature adsorption hydrogen storage

Hydrogen storage at low temperature and high pressure for application in automobile manufacturing

Improving Reproducibility in Hydrogen Storage Material Research

Thermodynamics analysis of hydrogen storage based on compressed gaseous hydrogen, liquid hydrogen and cryo-compressed hydrogen

Experimental Volumetric Hydrogen Uptake Determination at 77 K of Commercially Available Metal-Organic Framework Materials

Characterisation of porous hydrogen storage materials: carbons, zeolites, MOFs and PIMs

A Review of Experimental Researches on the Thermophysical Properties of Hydrogen-Containing Mixtures at High Temperatures and High Pressures

Thermodynamic characterization of the ($H_{2}$ + $C_{3}H_{8}$) system significant for the hydrogen economy: Experimental ($p$, $ρ$, $T$) determination and equation-of-state modelling

A numerical study on the thermal behavior of high pressure hydrogen in the on-board storage cylinder

Experimental and computational fluid dynamic investigation on thermal behaviors of liquid hydrogen during the no-vented storage process: A literature review

A Comparison of the Energy Expenditure in Different Storage Tank Geometries to Maintain H2 in the Liquid State