Abstract:Traditional light sources were required to provide stable and uniform illumination for a living or working environment considering performance of visual function of human being. The requirement was always reasonable until non-visual functions of the ganglion cells in the retina photosensitive layer were found. New generation of lighting technology, however, is emerging based on novel lighting materials such as LED and photobiological effects on human physiology and behavior.To realize dynamic lighting of LED whose intensity and color were adjustable to the need of photobiological effects, a quantitative dimming method based on Pulse Width Modulation (PWM) and light-mixing technology was presented. Beginning with two channels' PWM, this paper demonstrated the determinacy and limitation of PWM dimming for realizing Expected Photometric and Colorimetric Quantities (EPCQ), in accordance with the analysis on geometrical, photometric, colorimetric and electrodynamic constraints. A quantitative model which mapped the EPCQ into duty cycles was finally established. The deduced model suggested that the determinacy was a unique individuality only for two channels' and three channels' PWM, but the limitation was an inevitable commonness for multiple channels'. To examine the model, a light-mixing experiment with two kinds of white LED simulated variations of illuminance and Correlation Color Temperature (CCT) from dawn to midday. Mean deviations between theoretical values and measured values were obtained, which were 15lx and 23K respectively. Result shows that this method can effectively realize the light spectrum which has a specific requirement of EPCQ, and provides a theoretical basis and a practical way for dynamic lighting of LED.

Simulation and Calculation of High Quality White Light Mixed with Three Channels and Six Color LEDs

White LED Based on YAG : Ce,Gd Phosphor and CdSe–ZnS Core/Shell Quantum Dots

Optical design for uniform color mixing illumination system

Novel Measurement System and Analytical Method for White LED Phosphors

Uniform illumination design by configuration of LEDs and optimization of LED lens for large-scale color-mixing applications.

Spectral Design Method to Simulate Tunable Spectra of Various Light Sources Based on Multi-Channel LEDs

Optimization of Trichromatic Color Temperature Tunable White Light LEDs

Multi-chip Dynamic White Light Emitting Diode with High Level Photobiological Safety and Good Color Fidelity

[Optimizing Color Rendering for Mixed-Color White Light LED].

Study on Color Temperature Tunable Four-Chips White LEDs

Tunable LED Lighting with Five Channels of RGCWW for High Circadian and Visual Performances

Color Controllable Smart White Lighting Based on Various Device Architectures of Electrically Driven Quantum-Dot Light-Emitting Diodes

Quality of LED Based Daylight Simulators

Colour temperature tunable RGBW clusters with 3 control channels

Wavelength Dependence of Colorimetric Properties of Lighting Sources Based on Multi-Color LEDs

Optoelectronic System and Device Integration for Quantum-Dot Light-Emitting Diode White Lighting with Computational Design Framework

Spectral Optimization of White LED Based on Mesopic Luminance and Color Gamut Volume for Dim Lighting Conditions

A Quantitative Dimming Method for LED Based on PWM

Color rendering and luminous efficacy analysis in YAG PC-LED by improved Gauss simulation

Low blue light hazard for tunable white light emitting diode with high color fidelity and circadian performances

Spectrally Tunable LED Lighting System and Its Optimization Algorithm