Abstract:This study presents a low-power Zigbee receiver with a current-reusing structure and function-reused mixing techniques. To reduce the overall power consumption, a low noise amplifier (LNA) and a power amplifier (PA) share the biasing current with a voltage-controlled oscillator (VCO) in the receiving (RX) mode and transmitting (TX) mode, respectively. The function-reused mixer reuses the radio frequency trans-conductance (RF gm) stage to amplify the down-converted intermediate frequency (IF) signal, obtaining a free IF gain without extra power consumption. A peak detector circuit detects the receiving signal strength and auto-adjusts the biasing current to save power when a strong signal strength is detected. Meanwhile, the peak detector helps to provide a coarse gain control as part of the auto-gain-control function. As part of the IF gain range is shared by the multiple-feedback (MFB) low-pass filter, the number of programmable-gain IF amplifier stages can be reduced, which also means a decrease in power consumption. A prototype of this wireless sensor network (WSN) receiver was designed and fabricated using the TSMC 130 nm CMOS process under a supply voltage of 1 V. The entire receiver realizes a noise figure (NF) of 3.5 dB and a receiving sensitivity of −90 dBm for the 0.25 Mbps offset quadrature phase shift keying (O-QPSK) signal with a power consumption of 2.9 mW.

Design of a 2 .4GHz CMOS Radio Transceiver for IEEE 802 .15 .4 (ZigBee) Standard Applications

A 11 Mw 2.4 GHz 0.18 Μm CMOS Transceivers for Wireless Sensor Networks

A compact dual-band direct-conversion CMOS transceiver for 802.11a/b/g WLAN

A Low-Power Monolithic CMOS Transceiver for 802.11b Wireless LANs

A 0.6-V Zero-IF/Low-IF Receiver with Integrated Fractional-N Synthesizer for 2.4-Ghz ISM-Band Applications.

Integrated D-Band Transmitter and Receiver for Wireless Data Communication in 65 Nm Cmos

A 0.6V 32.5mw Highly Integrated Receiver for 2.4ghz ISM-Band Applications

20 . 6 A 0 . 6 V 32 . 5 mW Highly Integrated Receiver for 2 . 4 GHz ISM-Band Applications

A 100mhz-2ghz Wireless Receiver In 40-Nm Cmos For Software-Defined Radio

A Low-Voltage Multi-Band ZigBee Transceiver

A 2.4-Ghz CMOS Monolithic Transceiver Front-End for IEEE 802.11b Wireless LAN Applications

A 2.4 GHz 0.18 Μm CMOS Transmitter for IEEE 802.11b Wireless LAN

A 2.4 GHz 2.9 Mw Zigbee RF Receiver with Current-Reusing and Function-Reused Mixing Techniques

A 1V 1.4 Mw Multi-Band ZigBee Receiver with 64 Db SFDR

A 2.4-Ghz Fully CMOS Integrated Transmitter for 802.1lb Wireless LAN

A Fully CMOS Integrated Transmitter for Wireless LAN Applications

A Low Noise, High Linearity CMOS Receiver for 802. 11b WLAN Applications

A Low Voltage CMOS RF Front-End for IEEE 802.11b WLAN Transceiver

Design and Experimental Evaluation of Long-Distance and High-Mobility ZigBee Transceivers for WSNs

A high efficient baseband transceiver for IEEE 802.15.4 LR-WPAN systems

Design of low-energy transceivers in nanoscale CMOS for Internet of Things (Invited)