Abstract:In order to measure the frequency of a sinusoidal signal in high precision,the article designs a digit frequency meter based on FPGA (field programmable gate array).Besides measuring frequency,the device can also measure the time interval of two square signals and the duty ratio of a pulse signal.With FPGA and MCU (micro control unit) as the kernel,the meter adopts the method called ‘Parallel Multi-Ways Counting Method’ to realize the high precise measurement.Specifically,signals would input FPGA after high frequency amplification module and high frequency comparing module.And then signals would be divided into multi-ways to decrease frequency by different times and be counted synchronously.Finally,MCU would select the mostaccurate result and get the final result after computing.After the test,the meter can measure the frequency of a sinusoidal signal from 1 Hz to 199 MHz and from 10 mVrms to 1 Vrms with the relative error not above 0.0001％;the meter can measure the time interval of two square signals from 50 mV to 1 V and from 100 Hz to 1 MHz with the relative error not above 1％;the meter can measure the duty ratio of a pulse signal from 50 mV to 1 V and from 1 Hz to 5 MHz with the relative error not above 1％.Therefore,the meter has thefeature of high precision,wide frequency range and wide amplitude.

Design and Realization of Digital Frequency Counter Based on VHDL

Design of A Programmable Multi Frequency Detector

Design Of A Low Power Wide-Band High Resolution Programmable Frequency Divider

A 2ghz Programmable Counter with New Re-Loadable D Flip-Flop

GHz Programmable Counter with Low Power Consumption

Design of electronic clock and stopwatch based on FPGA and VHDL language

A Low-Cost FPGA-Based Coarse-Fine Counting Time-to-Digital Converter With External High-Precision Reference Clock

Design of Multifunction Digital Clock Based on FPGA

Design of high precision frequency meter with FPGA

Design and simulation of frequency divider circuit based on multisim

A Method of Digitalized Implementation of Analog Based on Single Chip 89C52

Design for HW/SW Co-Testing Based on FPGA

Design and Realization of the Time Sequence Driving Circuit for a Kind of Linear CCD Based on CPLD and VHDL

Design of Multiplex Pulse Sequence Signal Detector Based on CPLD

Frequency Measurement in View of CPLD and Monolithic Processor Equal Precision

Design Of A Multi-Path Synchronous Frequency Meter With High Accuracy

Development and Optimization Design of Digital Logic device based on FPGA

Design of a frequency synthesizer based on ADF4351 and FPGA

FPGA Integer Frequency Divider Design and Simulation based on Verilog

Design and Implementation of Simple Digital Oscilloscope Based on STM32

A Integral Detecting Method in Mid-frequency Difference Heterodyne Signal Processing