Abstract:We report a temperature measurement method based on fixed wavelength transmission intensity of long-period fiber grating. Relative to wavelength or edge filtering, this method has obvious advantages in measurement accuracy and cost. The relationship between the transmission intensity and temperature at a fixed wavelength is simulated based on the theory of long-period fiber grating coupling mode. The results show that the transmission intensity of the fixed wavelength is linearly related to the temperature with the appropriate parameters. In the experiment, the transmission spectrum shows two resonant peaks at 1485 and 1538 nm. Two fixed wavelengths at 1480.4 and 1549.7 nm were selected, and the results show a linear relationship between transmission intensity and temperature. The temperature sensitivity of the transmission intensity at 1480.4 nm is about 0.0544 dB / ° C, which means the value of I1480.4 nm / I0 changes by 1.3% for every 1°C. To eliminate the influence of light source and enhance the measurement sensitivity, the ratio of the transmission intensity of two fixed wavelengths was selected to carry out the temperature measurement. The temperature sensitivity of the ratio of I1480.4 nm / I1549.7 nm was 0.0729 dB / ° C, that is, the light intensity ratio changed by 1.7% when the temperature changed by 1°C. A more reasonable design of long-period fiber grating and a more appropriate selection of fixed wavelength should be able to obtain higher temperature sensitivity.

Temperature measurement based on Brillouin and Rayleigh scattered light beat frequencies

Optical Measurement by a Dual-Frequency Comb Based on Rayleigh Scattered Stokes Light

A Temperature Sensor Based on A Brillouin Optoelectronic Oscillator

Simultaneous Measurement of Refractive Index and Temperature Using a Mach-Zehnder Interferometer with Forward Core-Cladding-core Recoupling

High accuracy pressure and temperature simultaneous measurement based on forward Brillouin scattering in highly nonlinear fiber

A Distributed Brillouin Temperature Sensor Using a Single-Photon Detector

Study on the Technique of Brillouin Scattering Distributed Optical Fiber SensingBased on Optical Interferometric Heterodyne Detection

High-Resolution Multiple Microwave Frequency Measurement Based on Stimulated Brillouin Scattering

Method for temperature measurement of taper long-period fiber Bragg grating

Fiber‐optic sensing scheme based on high‐order Stimulated Brillouin scattering in a fiber ring and frequency down‐conversion

Instantaneous Microwave Frequency Measurement with a Uniform Resolution and Improved Dynamic Range

Stimulated Brillouin scattering slow-light-based fiber-optic temperature sensor.

Non-Step-Scanning Rayleigh–Brillouin Distributed Fiber-Optic Sensing System Utilizing Double Sideband Modulation

Optomechanically Mode-Locked Laser Sensor for High Accuracy Temperature Measurement

Distributed Temperature Sensing Using Stimulated-Brillouin-Scattering-Based Slow Light

Resonant fiber-optic thermometry with high resolution and wide range

High-Precision Measurement of Brillouin Frequency Shift in Brillouin Optical Time-Domain Reflectometer Based on Half-Peak Fitting Algorithm of Power Spectrum

Distributed fiber optic temperature sensor based on dynamic calibration of Raman Stokes backscattering light intensity

The Technique of Brillouin Scattering-Distributed Optical Fiber Sensing Based on Microwave Electrooptical Modulation

Optical fiber temperature sensor based on beat frequency and Vernier effect of fiber ring resonator composite cavity

Design and Implementation of Temperature Measurement System Based on Distributed Fiber Grating Sensor