Abstract:<p>Wavelength-switchable fiber laser systems have many potential applications. Herein, the use of an erbium-doped fiber laser based on parallel fiber Bragg gratings (FBGs) (ASE: amplified spontaneous emission; BRM: broadband reflection mirror; CCD: charged-coupled device; EDFL: erbium-doped fiber laser; FBG: fiber Bragg gratings; IR: infrared; MZI: Mach–Zehnder interferometer; OSA: optical spectrum analyzer; OC: output coupler; PC: polarization controller; SNR: signal-to-noise ratios; 3D: three-dimensional; wavelength division multiplexing (WDM)) is proposed to achieve C + L band triple-wavelength-switchable laser output at approximately 1.5 μm. In the proposed system configuration, three parallel FBGs with different resonant wavelengths were fabricated using an 800 nm femtosecond pulsed laser. The proposed fiber laser incorporates first-order FBGs with the periods of 538, 542, and 547 nm. The femtosecond laser was propagated through polyimide coating and cladding and was focused onto the fiber core by a 63× oil lens, while FBGs were inscribed with the use of a point-by-point method to generate resonant wavelengths at 1555.3, 1569.2, and 1583.1 nm. When the FBGs were used as wavelength selectors, a lasing threshold of 85 mW was obtained, and switchable lasing with stable single- and dual-wavelength outputs was achieved based on the adjustment of a polarization controller. Concerning the switchable single-wavelength lasing, the signal-to-noise ratio was greater than 37.23 dB, and the 3 dB linewidth was less than 0.09 nm. The respective power fluctuation measurements were less than 0.22 and 0.68 dB for the single- and dual-wavelength lasers at 26 °C over a scan time of 30 min.</p>

Wavelength Tunable Fiber Laser Based on Asymmetric Fiber Loop Mirror

Wavelength-Tunable Single Frequency Ytterbium-Doped Fiber Laser with Loop Mirror Filter

Multifrequency Erbium-Doped Fiber Laser Operating at Room Temperature

Tunable Multiwavelength Erbium-Doped Fiber Laser Based on Nonlinear Optical Loop Mirror and Birefringence Fiber Filter

All-fiber wavelength-tunable Ytterbium-doped mode-locked lasers based on fiber loop mirror

Multiwavelength Erbium-Doped Fiber Laser Based on a Nonlinear Amplifying Loop Mirror Assisted by Un-Pumped EDF

Wavelength-tunable 1104 Nm Nonlinear Amplifier Loop Mirror Laser Based on a Polarization-Maintaining Double-Cladding Fiber.

C- and L-Bands Wavelength-Tunable Mode-Locked Fiber Laser

Single-frequency Fiber Laser from Linear Cavity with Loop Mirror Filter and Dual-Cascaded FBGs

Wavelength-Spacing Tunable Multi-Wavelength Erbium-Doped Fiber Laser Incorporating A Semiconductor Optical Amplifier

Multiwavelength Erbium-Doped Fiber Laser Employing Nonlinear Polarization Rotation in A Symmetric Nonlinear Optical Loop Mirror

Generation of widely tunable single- and dual-wavelength in a figure-eight mode-locked fiber laser

Tunable and Switchable Low-Threshold Multi-Wavelength Erbium-Doped Fiber Pulsed Laser Based on Lyot Filter and NOLM

Switchable multiwavelength erbium doped fiber laser based on a nonlinear optical loop mirror incorporating multiple fiber Bragg gratings

1015-1080 Nm Tunable Polarization-Maintaining Dissipative Soliton Mode-Locked Fiber Laser

100nm Widely Tunable Er-doped Fiber Laser

Tunable Erbium-Doped Fiber Ring Laser Based on an All-Fiber Filter

Wideband wavelength tunable fiber ring laser with flattened output power spectrum

Tunable Multiwavelength Er-Doped Fiber Laser with a Two-Stage Lyot Filter

Tunable Multiwavelength Erbium-Doped Fiber Laser Based on Intensity-Dependent Loss and Intra-Cavity Loss Modulation

Wavelength-switchable erbium-doped fiber laser incorporating fiber Bragg grating array fabricated by infrared femtosecond laser inscription