The Status and Development of Fieldbus Technology

Yan WANG,Fuen Zhang

DOI: https://doi.org/10.3969/j.issn.1005-9490.2001.01.013

2001-01-01

Abstract:The fieldbus technology is new technology in automatization. In this paper, the essay elaborates on the cradle and development of fieldbus technology, its history status and features is elaborated, developing trend is forecasted.

What problem does this paper attempt to address?

Survey on Control Research of Networked Control Systems Based of Field Bus

LIU Gui-guo,LIU He,HUANG Dao

DOI: https://doi.org/10.3969/j.issn.1671-9565.2006.01.015

2006-01-01

Abstract:In view of control,the research background and contents on the networked control systems based of field bus are introduced in this paper.Networked control systems is a discipline as the combination of network and control science which covers a wide subjects.First,the three mathematic models of networked control systems are discussed, which consist of short network-induced delay with the controller time or event driven,and long network-induced delay with the controller event driven.Second,the mean value controllability,mean square controllability, mean value observability and mean square observability of networked control systems are analyzed. Third,several methods of controller design under the conditions of networked systems are intrduced.Finally.a further discussion on performance improvement of networked control systems in the furture is proposed.
Developing Trend Of Industrial Fieldbus Control System

Chen Gang,Ye Dong,Che Rensheng

DOI: https://doi.org/10.1109/ICEMI.2007.4350563

2007-01-01

Abstract:The evolvement of the industrial field control system is brief reviewed. Its main contents include intelligent device and instrument, distributed control system, fieldbus and industry Ethernet. In the past several years, the standard of Ethernet had been improved much especially on determination, speed and information priority. Recently, industrial Ethernet has been combined with fieldbus and gradually infiltrate into the layer of industrial field devices. After stating the use of Ethernet in industry field and giving some examples, the paper comes to a conclusion: the combination of Ethernet and fieldbus is the future of industry automation.
Brief Introduction to DCS and the Fieldbus Technology

ZHANG Zhen,NIU Yu-gang

DOI: https://doi.org/10.3969/j·issn.1000-3886.2013.01.002

2013-01-01

Abstract:The fieldbus technology is very significant to the industry. First the definition、development and composition of Distributed Control System is briefly introduced in the paper .Then,the present application situation and latest developments of the fieldbus technology are discussed from the aspect of the formation background、conception、feature、advantages and composition. Some types of popular national Fieldbuses such as CAN、LonWorks、FF、HART 、Profibus and the communication protocol 、applied field、real-time and the solution of dealing with the changes in technology and system failure are also introduced.
Application of Fieldbus Technology in Substation Integrated Automation System

Danyang Li,Chundong Song,Lili Xu

DOI: https://doi.org/10.18686/AHE.V4I12.3203

2021-03-24

Abstract:The development of fieldbus technology is an industrial data bus technology in the field of electrical engineering and automation. It can solve the problem of digital communication between intelligent instruments, controllers, actuators and other field devices. In addition, it can also effectively solve the problem of information transmission between these field control devices and advanced control systems. This paper analyzes the application of this technology combined with a number of engineering examples.

Engineering,Computer Science
A SUMMARY OF AUTOMATION TECHNOLOGY‘S DEVELOPMENT FOR CERAMIC TILE AND BRICK

Wang Wenlin,Zhu Fan,Zhu Weiqiu

DOI: https://doi.org/10.3969/j.issn.1001-9642.2006.01.002

2006-01-01

Abstract:By outlining the state of arts of both basic and integrated automation technology in ceramic tile plants in china and abroad, An integrated whole automation model for a ceramic tile plant with representative tile-producing technics is presented on the basis of Ethernet and Fieldbus technology. The further research and development works are summarized at last.
A Review of the Fieldbus

Tong Weiming,Zhang Dongzhong,Song Junbo

2002-01-01

Abstract:In the article the conception of the fieldbus was completely introduced, the composing of the fieldbus system for the first time and the system structure of the fieldbus control system by several typical examples were shown, the essential technology character of the fieldbus, expatiation on the virtues of the fieldbus were analyzed.
To Construct Industrial Wireless Networks in Automation Systems

冯冬芹,褚健

DOI: https://doi.org/10.3969/j.issn.1005-2852.2008.z1.004

2008-01-01

Abstract:On the view of the requirement of industrial networks,some key problems and possible resolutions for using wireless communication technologies as industrial networks are analyzed,And then,some application modes of indus- trial wireless are presented.
A Study of AR in the Fieldbus Access Sublayer of Foundation Fieldbus

LIU Yong,FENG Dong-qin

DOI: https://doi.org/10.3969/j.issn.1000-0682.2006.01.001

2006-01-01

Abstract:Devices in the FF network can communicate with each other through VCR.This paper gives an introduction about the FAS part of it,i.e.AR,including its function,types and their difference,methods of association and abolishment.
Realtime Characteristic of FF Like Centralized Control Fieldbus and Its State-of-art

Z Wang,Z Yue,JM Chen,YQ Song,YX Sun

DOI: https://doi.org/10.1109/isie.2002.1026055

2002-01-01

Abstract:The temporal property of MAC protocol of fieldbus is critical to meet real-time constraints of field devices in factory floor. Among various types of MAC protocols, the one using centralized strategy is characterized by providing a feasible schedule to meet different temporal constraints of field devices online, and also providing schedulability analysis offline a priori. WorldFIP and FF, two popular international standards of fieldbus, both adapt a centralized strategy, which is mainly implemented by schedule table (ST). This paper mainly discusses how to construct ST including size of ST schedule algorithm and schedulability analysis, to meet requirement of field devices on response time, jitter, synchronization, and its state-of-the art.
The Situation and Future Development of Wireless Industrial Networks

高汉荣,冯冬芹

DOI: https://doi.org/10.3969/j.issn.1005-2852.2008.z1.010

2008-01-01

Abstract:This paper first summarizes the features of the wireless industrial networks and the challenges it confronts, then introduces the features and applications of ZigBee,wireless HART and ISA SP100 in detail to describe the situation of wireless industrial networks.Finally;this paper discusses the future development of wireless industrial networks.
Applied Fieldbus into Communication Systems in ITS

Min Li,Hui Wang,Ping Li

DOI: https://doi.org/10.3969/j.issn.1002-0268.2001.06.021

2001-01-01

Abstract:After the communication system in ITS is introduced briefly, its hierarchy of the communication system is presented. By analyzing the strong and weak points of standardized fieldbus, a new hierarchy communication system framework is presented in the paper, in which the widely accepted standards of higher layer are kept unchanged while the lower layer taking a new solution based on modified fieldbus. In order to demonstrate the feasibility, a prototype system is introduced.
A Basic Study on Algorithm of Real-Time Schedule Table for Fieldbus

JM Chen,Z Wang,YX Sun

DOI: https://doi.org/10.1109/wcica.2002.1021384

2002-01-01

Abstract:For a field-level industrial network, the real-time characteristic is very important. Fieldbuses are typical industrial control networks and their real-time characteristic mainly depends on the temporal property of the MAC protocol, which also is requirement of a distributed computer control system. Both WorldFIP and FF are the most important fieldbuses by their character of adopting a schedule table (ST) to control the real-time communication of tasks. This paper mainly introduces the characteristic of the ST algorithm, including establishing and optimizing it, and how to use it to support real-time communication in an industrial control network.
Research on Application of Fieldbus in Power Pant Unit Control

Zhang Yi,Han Bing

DOI: https://doi.org/10.3969/j.issn.1000-0380.2008.10.006

2008-01-01

Abstract:The current status of the applications of fieldbus in fossil-fired power plants worldwide is expounded,and the system configuration,design criteria,and cautions of fieldbus systems in field equipment layer in fossil-fired power plants are analyzed in accordance with the features of unit control.The results of comparison in technical and economic aspects show that fieldbus technology will bring active factors to digitized management and control of whole plant,and whole life cycle of design,installation,commissioning,operation,maintenance in low cost.Thus it is feasible to promote and adopt fieldbus technology in field equipment layer in power plant.
Application Status and Challenge of PROFIBUS Technology in Industrial Automation Field

Qiang Zhe,Hongxiao Sun,Yuliang Liu,Ziyi Rao,Geng Liang

DOI: https://doi.org/10.62051/ijmee.v2n2.03

2024-04-25

Abstract:This article first introduces the basic concepts and principles of PROFIBUS technology, and then elaborates on its application status in the field of industrial automation from three aspects: manufacturing, process control, and drive technology, including its wide range of applications and advantages. Subsequently, the main challenges currently faced by PROFIBUS technology were analyzed, such as integration with emerging industrial Ethernet technologies, data security issues, and the complexity of system upgrades and maintenance. Finally, the article looks forward to the future development trends of PROFIBUS technology, including further integration with industrial Ethernet technology and the introduction of encryption algorithms to enhance data security. Overall, PROFIBUS is a mature fieldbus technology. Still crucial in the field of industrial automation. However, with the development of new technologies and changes in application requirements, its future development still faces many challenges and opportunities.
The development of a field controller based on industrial ethernet

Xiao-xia WANG,Wen-jun HUANG,Guo-qing ZHONG,Jian-xiang JIN

DOI: https://doi.org/10.3969/j.issn.1000-0682.2005.06.005

2005-01-01

Abstract:In accordance with the requirement of real-time control in the current industrial automation field,a solution to a field controller based on an industrial ethernet is offered,and several significant problems in the field controller are analyzed and solved.The field controller performs excellently in real-time property,openness,reliability,mathematical operation and multi-bus integration.
Application of fieldbus in monitoring and control system for automobile jointinga assembly line

Wei-han ZHANG,Heng LIN,Shou-hua YUAN,Zan-dong HAN,Da-yong JIN,Tai-hui PENG,Bao-qang LIN,Fa-gang LIU

DOI: https://doi.org/10.3969/j.issn.1001-3997.2001.02.017

2001-01-01

Abstract:In this paper, the idea of Fieldbus and application of Compobus/D network are introduced. A monitoring and control system for automobile jointing assembly line is taken for example to analysis several usually used methods in dealing with the monitoring and control system. Some advantages of Fieldbus are pointed out.
Development and Application of Experimental Equipment for Fieldbus Control System

Hairong Zheng

2005-01-01

Abstract:This paper introduced the development and application of a fieldbus control experimental system based on EtherNet,ProfiBus and DeviceNet.On the background of the experiment,it described the basic methods of configuring hardware and software and some problems which should be paid attention to in mapping address.
Application of Automatic Control System in Cement Industry Based on Profibus

FENG Yong,ZHANG Qiang,YANG Xu

DOI: https://doi.org/10.3969/j.issn.1004-289X.2008.04.020

2008-01-01

Abstract:It introduces the basic knowledge,characteristics as well as several common techniques of field bus.What is more,it also presents the scenarios of PROFIBUS techniques implemented in cement industry.The implementation of PROFIBUS field bus will economize the amount of hardware and investment,save expenses,improve the reliability,economy and tecnical function of computer monitoring system,and strenghthen productive efficiency.
Control System Based on Fieldbus for the Workshop of Unloading Coal Precipitator

Zi-sheng Zhang,Chao Cui,Qing Hao,Qiang Liu,Ji-guang Wang,Zhi-qiang Liu,Qing Li

DOI: https://doi.org/10.1109/CCIE.2010.154

2010-01-01

Abstract:The fieldbus technology is applied to the auto-control system of the coal unload workshop. The setting-up of the model, the design and the realization of the fieldbus control system are discussed. High-low voltage control systerm structure is analysed. Hardware of fieldbus and communication cards is designed. And the key points of the realization of the system are designated. The prospect of the fieldbus in controlling is also discussed. This technology can be well applied in practicality.
Real-time Communication Using Foundation Fieldbus

Yue Zhou,Zhi Wang,Tian-ran Wang,Hai-bin Yu

DOI: https://doi.org/10.1007/978-3-662-07219-6_13

2003-01-01

Abstract:Local area networks (LANs) are becoming popular in industrial computercontrolled systems increasingly. Broadcast LANs aimed at the interconnection of sensors, actuators and controllers are commonly known as fieldbus networks. Recently, the vendor-specific fieldbus has being substituted by vendor-independent standardized fieldbus, which supports the open system concept and has started to be used commonly. Particular relevance must be given to the IEC 61158 (1999), which encompasses eight widely used fieldbuses: FF HI, ControlNet, PROFIBUS, P-NET, FF HSE, SwiftNet, WorldFIP and Interbu (Xiuju 2000; Xiong 2000) known that time constraints are more stringent as we go down in the automation hierarchy. In this charter, we consider time constraints or deadlines as the maximum allowable time span between a message transfer request and its transmission on the bus. In fact, the total message cycle delay results from multiple factors, such as the access and queuing delays, the transmission time (frame length / transmission rate) and the protocol processing time. As we are dealing with realtime communication across a shared transmission medium, we focus our analysis on the access delay and queuing delay factors. These factors depend on the MAC (Medium Access Control) mechanism used by the fieldbus network. Fieldbus, as infrastructure of communication to support real-time traffic among field devices in factory floor, is one of typical real-time network. According to real-time application, protocol of MAC layer of fieldbus can be divided into event-triggered and time-triggered. The former does not support the real-time application directly and usually uses CSMA (Carrier Sense Multiple Access), like CAN and LON. The latter supports the real-time application directly and often uses token. Further, the time-triggered can be sub-divided into three classes: 1) centralized token in WorldFIP and Foundation Fieldbus; 2) distributed token in PROFIBUS and FDDI; 3) virtual token in P-Net. Recently, several studies on the ability of fieldbus networks to cope with realtime requirements have been presented, such as those by Tindell and Zuberi on

The Status and Development of Fieldbus Technology

Survey on Control Research of Networked Control Systems Based of Field Bus

Developing Trend Of Industrial Fieldbus Control System

Brief Introduction to DCS and the Fieldbus Technology

Application of Fieldbus Technology in Substation Integrated Automation System

A SUMMARY OF AUTOMATION TECHNOLOGY‘S DEVELOPMENT FOR CERAMIC TILE AND BRICK

A Review of the Fieldbus

To Construct Industrial Wireless Networks in Automation Systems

A Study of AR in the Fieldbus Access Sublayer of Foundation Fieldbus

Realtime Characteristic of FF Like Centralized Control Fieldbus and Its State-of-art

The Situation and Future Development of Wireless Industrial Networks

Applied Fieldbus into Communication Systems in ITS

A Basic Study on Algorithm of Real-Time Schedule Table for Fieldbus

Research on Application of Fieldbus in Power Pant Unit Control

Application Status and Challenge of PROFIBUS Technology in Industrial Automation Field

The development of a field controller based on industrial ethernet

Application of fieldbus in monitoring and control system for automobile jointinga assembly line

Development and Application of Experimental Equipment for Fieldbus Control System

Application of Automatic Control System in Cement Industry Based on Profibus

Control System Based on Fieldbus for the Workshop of Unloading Coal Precipitator

Real-time Communication Using Foundation Fieldbus