Abstract:A high ratio (winding ratio of 1:80) pulse transformer with a modular ferrite core was developed for a repetitive resonant charging system. The magnetic core is constructed from 68 small blocks of ferrites, glued together by epoxy resin. This allows a high degree of freedom in choosing core shape and size. Critical issues related to this modular design are the size tolerance of the individual ferrite blocks, the unavoidable air gap between the blocks, and the saturation of the core. To evaluate the swing of the flux density inside the core during the charging process, an equivalent circuit model was introduced. It was found that when a transformer is used in a resonant charging circuit, the minimal required volume of the magnetic material to keep the core unsaturated depends on the coupling coefficient of the transformer and is independent of the number of turns of the primary winding. Along the flux path, 17 small air gaps are present due to the inevitable joints between the ferrite blocks. The total air gap distance is about 0.67 mm. The primary and secondary windings have 16 turns and 1280 turns, respectively, and the actually obtained ratio is about 1:75.4. A coupling coefficient of 99.6% was obtained. Experimental results are in good agreement with the model, and the modular ferrite core works well. Using this transformer, the high-voltage capacitors can be charged up to more than 70 kV from a low-voltage capacitor with an initial charging voltage of about 965 V. With 26.9 J energy transfer, the increased flux density inside the core was about 0.23 T, and the core remains unsaturated. The energy transfer efficiency from the primary to the secondary was around 92%.

High voltage pulse capacitor charging power supply based on double resonant topology

Development of Electropulsing Treatment Device Based on Capacitor Energy Storage and Discharge

High Power Density Z-Source Resonant Wireless Charger with Line Frequency Sinusoidal Charging

Non-linear Capacitor Based Variable Capacitor for Self-tuning Resonant Converter in Wireless Power Transfer

A High-Voltage Pulse Transformer with a Modular Ferrite Core.

A high power charging power supply for capacitor in pulsed power system

Optimal Design of High-Efficiency Series Resonant Capacitor Charging Power Supply

Design and Operation Analysis of a Capacitive Adjustable Voltage Pulsed Power Supply

Design of Compact High-Voltage Capacitor Charging Power Supply for Pulsed Power Application

Design and Implementation of a High Power Density Three-Level Parallel Resonant Converter for Capacitor Charging Pulsed-Power Supply

Development of a 40kV/20kW, switching-mode pulse forming network charging power supply

Fixed Frequency LCC Resonant Converter Modeling and Optimal Design for High-Voltage Capacitor Charging Power Supply in Constant Power Control

Capacitive Power Transfer System with Double T-type Resonant Network for Mobile Devices Charging/Supply

A Capacitive Power Transfer System Designed for Stable Outputs with Load Variations

High-voltage power supply using series-connected full-bridge PWM converter for pulsed power applications

Series resonant switching charging circuit for kicked modulator and its simulation study

A Variable Frequency Constant Current Control for LCC Resonant Capacitor Charging Power Supply Based on State Plane Analysis

High Voltage Constant Current Capacitor Charging Power Supply Using Series Structure

Dual-Resonant Step-Up AC/DC Converter Based on Fixed Frequency Pulse Overlapping Modulation

Study of New Type, Soft-Switching Capacitor Charging Techniques

A Variable Frequency Phase Shift Modulation Constant Power Control Strategy for LCC Resonant Capacitor Charging Power Supply