Abstract:A high ratio (winding ratio of 1:80) pulse transformer with a modular ferrite core was developed for a repetitive resonant charging system. The magnetic core is constructed from 68 small blocks of ferrites, glued together by epoxy resin. This allows a high degree of freedom in choosing core shape and size. Critical issues related to this modular design are the size tolerance of the individual ferrite blocks, the unavoidable air gap between the blocks, and the saturation of the core. To evaluate the swing of the flux density inside the core during the charging process, an equivalent circuit model was introduced. It was found that when a transformer is used in a resonant charging circuit, the minimal required volume of the magnetic material to keep the core unsaturated depends on the coupling coefficient of the transformer and is independent of the number of turns of the primary winding. Along the flux path, 17 small air gaps are present due to the inevitable joints between the ferrite blocks. The total air gap distance is about 0.67 mm. The primary and secondary windings have 16 turns and 1280 turns, respectively, and the actually obtained ratio is about 1:75.4. A coupling coefficient of 99.6% was obtained. Experimental results are in good agreement with the model, and the modular ferrite core works well. Using this transformer, the high-voltage capacitors can be charged up to more than 70 kV from a low-voltage capacitor with an initial charging voltage of about 965 V. With 26.9 J energy transfer, the increased flux density inside the core was about 0.23 T, and the core remains unsaturated. The energy transfer efficiency from the primary to the secondary was around 92%.

Design and Implementation of a High Power Density Three-Level Parallel Resonant Converter for Capacitor Charging Pulsed-Power Supply

Study of a Single-stage Three-phase PFC DC/DC Converter With Series-parallel Connected Transforms

Design of High Power Density LLC Resonant Converter with Extra Wide Input Range

High Power Density Z-Source Resonant Wireless Charger with Line Frequency Sinusoidal Charging

Structural Design of A Five-Level Hybrid Active Npc Converter for High Power Density Motor Drives

Design of a 300 Kw Partial Power Processing Based DC-DC Converter for Electric Vehicles Extreme Fast Charging Stations

Design of CRM AC/DC Converter for Very High-Frequency High-Density WBG-based 6.6kw Bidirectional On-Board Battery Charger

High-Frequency High-Density Bidirectional EV Charger

A High-Voltage Pulse Transformer with a Modular Ferrite Core.

A High Power Density 3-Phase/1-phase Compatible MISN-PFC Converter for On-Board Charger

Design of Compact High-Voltage Capacitor Charging Power Supply for Pulsed Power Application

Three Phase PFC Converter with Multilevel Inductive Switching Network

A high power charging power supply for capacitor in pulsed power system

High-voltage power supply using series-connected full-bridge PWM converter for pulsed power applications

A High-Frequency High-Efficiency Three-Level LCC Converter for High-Voltage Charging Applications

Single Phase High Power Density MISN PFC Converter

High-Efficiency High-Density RDCX Modules Cascaded with CHB PFC Stage

Optimal Design of High-Efficiency Series Resonant Capacitor Charging Power Supply

A New Design Method for High Efficiency DC-DC Converters with Flying Capacitor Technology

Fixed Frequency LCC Resonant Converter Modeling and Optimal Design for High-Voltage Capacitor Charging Power Supply in Constant Power Control

A Hybrid Power Supply Based on Capacitor and Battery for Accurate Regulation of the Pulsed High Current for Inductive Load