Abstract:The development of fusion energy is one of the important International energy strategies with the important milestone is ITER (International Thermonuclear Experimental Reactor) project, initiated by many countries, such as: America, Europe, and Japan who agreed to set up TOKAMAK type fusion reactor in France. In ideal fusion reactor the fuel is purely deuterium, but it need higher temperature of reactor. In ITER project the fuels are deuterium and tritium which need lower temperature of the reactor. In this study tritium for fusion reactor can be produced by using reaction of lithium with neutron in the blanket region. With the tritium breeding blanket which react between Li-6 in the blanket with neutron resulted from the plasma region. In this research the material used in each layer surrounding the plasma in the reactor is optimized. Moreover, achieving self-sufficiency condition in the reactor in order tritium has enough availability to be consumed for a long time. In order to optimize Tritium Breeding Ratio (TBR) value in the fusion reactor, there are several strategies considered here. The first requirement is making variation in Li-6 enrichment to be 60%, 70%, and 90%. But, the result of that condition can not reach TBR value better than with no enrichment. Because there is reduction of Li-7 percent when increasing Li-6 percent. The other way is converting neutron multiplier material with Pb. From this, we get TBR value better with the Be as neutron multiplier. Beside of TBR value, fusion reactor can analyze the distribution of neutron flux and dose rate of neutron to know the change of neutron concentration for each layer in reactor. From the simulation in this study, 97% neutron concentration can be absorbed by material in reactor, so it is good enough. In addition, it is required to analyze spectrum neutron energy in many layers in the fusion reactor such as in blanket, coolant, and divertor. Actually material in that layer can resist in high temperature and high pressure condition for more than ten years.

Tritium inventory and tritium self-sufficiency of tritium fuel cycle system in Z-pinch driven fusion-fission hybrid reactor (Z-FFR)

Study On Neutronics And Fuel Cycle Of Fusion-Fission Hybrid Reactor

Preliminary Safety Analysis of Tritium Source Term for the CFETR Tritium Plant

Tritium Breeder Layer Evaluation of Fusion-Fission Hybrid System

Investigation on the Tritium Self-Sufficiency and Neutron Shielding Based on a Water-Cooled Blanket for CFETR at 1.5 GW

Estimation of China Fusion Engineering Test Reactor performance and burning fraction in different pellet fueling scenarios by a multi-species radial transport model

Preliminary Neutronics Analyses of China Dual-Functional Lithium-Lead (DFLL) Test Blanket Module for CFETR

Study on tritium transport characteristics in fluoride-salt-cooled high-temperature advanced reactor

Tritium Safety and Confinement Loop Design of Tritium Plant in a FPP

Estimation of CFETR performance and burning fraction in diﬀerent pellet fueling scenarios by a multi-species radial transport model

Optimization of tritium breeding and shielding analysis to plasma in ITER fusion reactor

Tritium Transport Modeling and Analysis for HCCB Blanket of CFETR

Burn Up Study of an Innovative Natural Uranium-Thorium Fueled Reprocessing Free Fusion-Fission Hybrid Reactor Blanket with Closed Thorium-Uranium Fuel Cycle

Numerical Simulation of Tritium Behavior under a Postulated Accident Condition for CFETR TEP System

Neutronic Analysis of a Thorium-Uranium Fueled Water Cooled Fusion-Fission Hybrid Blanket

Numerical Survey of the Sponge Mechanism for Reducing Tritium Retention in Fusion Reactors

Activation Calculation and Radiation Analysis for China Fusion Engineering Test Reactor

Optimization of Tritium Breeding Ratio in a DT and DD Submersion Tokamak Fusion Reactor

Summary of Tritium Source Term Study in 10 MW High Temperature Gas-Cooled Test Reactor

Generation and Distribution of Tritium in HTGRs and Review on the Tritiated Water Treatment Technologies

Study on Fission Blanket Fuel Cycling of a Fusion–fission Hybrid Energy Generation System