Abstract:As a classical type of smart materials, shape memory alloys (SMAs) are of high energy density, light weight, and low actuating voltage, and therefore are of great potential to be used as actuators for robots. Major challenges in controlling an SMA-driven soft robot are the limited bandwidth and in cases with external loads. Active cooling has been demonstrated to dramatically increase its bandwidth, but external load may cause severe inaccuracy in the system modeling. Controllers that do not rely on accurate modeling of the SMA-driven soft robot is essential. In this article, we designed an elastomeric soft robotic tentacle actuated by three pieces of SMA springs with both active heating (Joule heating) and active cooling (compressed air). We proposed a multi-input-multi-output controller that directly uses the heating and cooling states of the three SMAs to control the tentacle's bending posture in three-dimensional (3-D) space. The successful implementation of the controller is attributed to a novel dual-channel control algorithm that integrates the bending motion control and swing motion control, and a state-machine controller for coordinating the three SMAs' actuations to achieve robust swing motion control. The system with such hardware and control algorithm was capable of performing bending motions with maximum actuating speed $ > $ 90 $^\circ /$ s, deactuating speed $ > $ 25 $^\circ /$ s, closed-loop motions with rapidity (6–41 $^\circ /$ s for heating, 4–19 $^\circ /$ s for cooling), accuracy (steady-state error $ < $ 0.1 $^\circ$ for no load, 0.13 $\%$ of the full range; steady-state error $ < $ 1.2 $^\circ$ with load of 1 bodyweight, 1.6 $\%$ of the full range), and load-bearing capability (dynamic load: 1 bodyweight, static load: 8.8 bodyweights). Besides, the tentacle achieved efficient motion tracking by coordinating the bending and swing motion through the controller, for both predefined trajectories and random trajectories. We demonstrated a remotely controlled 360 $^\circ$ image scanning of a room using our proposed robotic tentacle equipped with a camera at its top end to intuitively show its performances. We believe this work will advance the design and control of SMA-driven soft continuum robots for potential uses in surgery and explorations of unknown areas.

Design of Control System for SMA Actuator Based on Resistance Feedback

Resistance Characteristics of SMA Actuator Based on the Variable Speed Phase Transformation Constitutive Model.

Control of a Rehabilitation Robotic Device Driven by Antagonistic Soft Actuators

Design of Software Measurement and Control Platform for GMA

The Design of Temperature Control System in Giant Magnetostrictive Actuator

Modeling, Simulation and control on the SMA-based rotary actuator

Design of Control System for Linear SMA Actuator Based on Fuzzy Control

The Design of Temperature Control System in Flexure Type Giant Magnetostrictive Actuator

Research on Bionic Robot Micro Adsorption Mechanism SMA Driven System.

Self-Sensing Control of Antagonistic SMA Actuators Based on Resistance-Displacement Hysteresis Compensation

Adaptive control for shape memory alloy actuated systems with applications to human–robot interaction

Study on the Actuation and Control System of the Guiding Robot for Catheter Based on Heat Transfer Analysis

Output-Feedback Adaptive Neural Control of a Compliant Differential SMA Actuator

Modeling & Simulation Of Push-Pull Type Sma Actuator System

Active-Cooling-in-the-Loop Controller Design and Implementation for an SMA-Driven Soft Robotic Tentacle

Design and Experimental Study of a New SMA Rotary Actuator

Modeling And Tracking Control System Of Shape Memory Alloy Actuator

Modeling and Position Control Simulation Research on Shape Memory Alloy Spring Actuator

Sma Actuators in Medical Applications

Modeling and Analysis of Resistance-Sensing Characteristics for Two-Way Shape Memory Alloy-Based Deep-Sea Actuators

A New Design of PMSM Robust Current Controller Based on Model-Free Adaptive Control Strategy