Abstract:Aeromagnetic compensation is a signal-processing method to suppress the magnetic interference from the airborne platform that far exceeds the target magnetic signal. With the development of measurement technology, the traditional aeromagnetic compensation model in which the motion platform is considered as a rigidly connected whole cannot satisfy the request for high-quality aeromagnetic detection, and the magnetic interference generated by the small relative motion components needs to draw our attention. In this article, the source of maneuver magnetic interference on the aircraft platform is split into two parts, that is, the rigidly connected main body part (MBP) and moving part (MP), and their compensation models can be both built by referring to the Tolles–Lawson (TL) model. The key factor in these two models is how to obtain the direction cosine that describes the maneuvering actions of aircraft. In the MBP compensation model, the direction cosine can be directly obtained by the onboard fluxgate magnetometer. However, those in the MP model cannot be directly obtained because there is no monitoring equipment for it. Therefore, a scheme for calculating the direction cosine of the MP compensation model is proposed. This scheme combines the direction cosine obtained by the onboard fluxgate magnetometer with the relative motion angles. And considering the influence of geomagnetic gradient magnetic interference, its compensation model is brought to form a new aeromagnetic compensation model, herein called the TLGM model. This model is different from the traditional TL model and is nonlinear since the three unknown relative motion angles, so the quantum genetic algorithm (QGA) is introduced to combine with recursive least-squares (RLS) to estimate those unknowns. Some field experiments were conducted, and the results show that the proposed method reduces the standard deviations (STDs) and figures of merit (FOMs) by over 42% and 39%, respectively, compared with those using the previous model. Also, the proposed compensation method requires no additional motion monitoring sensors and is more convenient for practical applications.

Method to Magnetic Deviation Self-Optimal Compensation of Digital Magnetic Compass

All Attitude Magnetic Deviation Compensation for Digital Magnetic Compass

Attitude Solution and Error Compensation of Magnetic Compass

Three-dimensional Magnetic Compass Error Compensation Algorithm Based on Ellipsoid Surface Fitting

A Fast Magnetic Deviation Calibration Algorithm for Tri-Axial Electronic Compass

Compensation of geomagnetic field measurement error based on damped particle swarm optimization

Comparison of Three Kinds of Compensation Algorithms Based on Magnetic Sensors

Error Model of Geomagnetic-Field Measurement and Extended Kalman-filter Based Compensation Method.

A calibration method for magnetic sensors and accelerometer in tilt-compensated digital compass

Two-step calibration method for three-axis magnetic sensor error based on particle swarm optimization

Error Compensation Algorithm and Calibration Experiment Based on Ellipse Model for Magnetic Compass in Land Navigation System

Research on Magnetic Heading Error Compensation Technology under the Strong Magnetic Interference

Electronic compass design and error compensation

Magnetic Sensor Error Compensation Algorithm Based on Ellipse Rotation

Calibration method of electronic compass with error-separation based on non-magnetic turntable

Sampson-distance Based Ellipse Fitting for Calibration of Magnetic Compass Deviations

Error Compensation Method for Three-Axis Magnetic Sensor Based on Ellipsoid Fitting

A Modified Aeromagnetic Compensation Method Robust to the Motion State of Aviation Platform Part

Research on Magnetic Deviation Compensation for Magnetometers Based on Ellipse Hypothesis

Magnetic Deviation Analysis And Compensation Of Magnetic Sensors For Navigation

Error-separation Method for the Calibration of Magnetic Compass