Abstract:This thesis presents the modeling, analysis, design and experimental validation of a robust sensorless control method for permanent magnet synchronous motor (PMSM) based on Extended Kalman Filter (EKF) to accurately estimate speed and rotor position. Currently, there is no robust position/speed sensorless control method available for the permanent magnet synchronous motor (PMSM) in the published literature. Traditionally, commercial off-the-shelf simulation models for PMSM do not incorporate initial rotor position and simplified steady-state based modeling of the associated power electronic circuitry and controls are used. These limitations have prevented the development and application of a robust real-time sensorless control method with good dynamic performance over the full speed range for the PMSM. The main focus of this thesis is to overcome these limitations. In particular, a detailed real-time PMSM model in MATLAB/Simulink simulation environment is developed which is used to validate the EKF sensorless control method by varying the initial position of the rotor. The proposed position/speed sensorless control based on EKF method along with all the power electronic circuitry are modeled in this simulation environment. This user-friendly simulation and rapid-prototyping platform is then effectively used to predict, analyse, fine-tune and validate proper operation of the proposed EKF sensorless control method for all operating conditions. In particular, different control strategies are reviewed and the performance of the proposed EKF sensorless control method is critically assessed and validated for different types of dynamic and static torque loads. The robustness of the proposed EKF sensorless method is demonstrated by validating proper operation of the closed-loop motor control system for different rotor initial positions and insensitivity of the EKF speed/position estimation method to the PMSM parameter variations. Proper operation of the proposed EKF based sensorless control method for a high speed permanent magnet synchronous machine is verified experimentally in the lab at Honeywell.

Detection Technology of Rotor Position and Speed of BLDCM Based on MEKF

Design and implementation of the extended Kalman filter for the speed and rotor position estimation of brushless DC motor

Applications of Unscented Kalman Filter on Position Sensorless Control of Permanent Magnet Linear Syncheonous Motor

Position and Speed Estimation of Permanent Magnet Linear Synchronous Motor Based on UKF

Speed and rotor position estimation for sensorless brushless DC motor drive based on particle filter

Sensorless Control of Permanent Magnet Synchronous Motor Based on Extended Kalman Filter

Extended Kalman Filter Application in Permanent Magnet Synchronous Motor Sensorless Control

Position Estimation Accuracy Improvement Based on Accurate Modeling of Self-Sensing Active Magnetic Bearings

An Improved Rotor Position Estimation Method for PMSM Using Low-Resolution Hall-Effect Sensors

Application of Reduced-Order Extended Kalman Filter in Permanent Magnet Synchronous Motor Sensorless Regulating System

Sensorless Control of PMSM Based on Extended Kalman Filter

High Performance PMSM Control System Based on Extended Kalman Filter

Rotor Position Estimation Strategy for Self-Sensing Active Magnetic Bearing Considering Eddy Currents

PMSM Mechanical Sensor-Less Vector Control Based on Extended Kalman Filter

Sensorless Control Method Of Pmsm Based On Extended Kalman Filter

Permanent magnet flux identification of IPMSM based on EKF with speed sensorless control

Research on Permanent Magnet Linear Synchronous Motor Position Sensorless Control System

Speed and Flux Linkage Observer for Permanent Magnet Synchronous Motor Based on EKF

Sensorless Control for PMSM Drives Using the Cubature Kalman Filter based Speed and Flux Observer

Speed Estimation Method of Linear Motor Extended Kalman Filter Based on Attenuation Memory

Improving Extended Kalman Filter for Speed Sensorless Vector Control of Induction Motor