Abstract:The phosphoric acid (PA) leakage problem has been a major constraint in the practical utilization of PA-doped polybenzimidazole for high-temperature proton exchange membranes (HT-PEMs). Increasing the retaining ability of the proton exchange membranes for free PA while decreasing the amount of PA doping seems to be a viable approach to reduce the possibility of PA leakage. In this work, the mild ester exchange reaction was introduced for the first time to prepare phosphonic acid grafted polybenzimidazoles containing pyridine (g-p-X). The phosphonic acid groups act as transport sites for proton conduction, effectively reducing the need for free PA in g-p-X membranes. Meanwhile, the pyridine immobilizes a portion of the PA through strong ionic interactions, and the membranes exhibit a high PA retention capacity. Among them, the g-p-20 membrane reaches 84.6% PA retention after the 120 h test. Thanks to the dual effects of the phosphonic acid groups and pyridine, the g-p-20 membrane shows a proton conductivity of 42 mS cm-1 at 180 degrees C without humidification. Moreover, with only 175.3 wt% PA doping, its highest single cell power density achieves 951 mW cm-2 (180 degrees C). Notably, after 120 h of steady operation at 140 degrees C, the voltage decay rate of the g-p-20 is only 10 mu V h-1. This work presents a viable concept for addressing the problem of PA leakage from HT-PEMs in long-term operation. Phosphonic acid grafted polybenzimidazole containing pyridine for high temperature proton exchange membranes exhibit excellent stability under low phosphoric acid doping conditions.

Modification of SPPESK/PWA proton exchange membrane by layer-by-layer self-assembly

Composite Membranes of Sulfonated Poly(phthalazinone Ether Ketone) Doped with 12-Phosphotungstic Acid (H3PW12O40) for Proton Exchange Membranes

Modified sulfonated poly(phthalazinone ether ketone) membranes with inorganic particles for potential applications in PEMFCs

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Cross-Linkable Polymeric Ionic Liquid Improve Phosphoric Acid Retention and Long-Term Conductivity Stability in Polybenzimidazole Based PEMs

Achieving Better Balance on the Mechanical Stability and Conduction Performance of Sulfonated Poly(ether Ether Ketone) Proton Exchange Membranes Through Polydopamine/polyethyleneimine Co-Modified Poly(vinylidene Fluoride) Nanofiber As Support

High-performance proton exchange membrane derived from N-heterocycle poly(aryl ether sulfone)s with ether-free hydrophilic blocks and exhibiting good stability and proton-conducting performance

Simultaneous enhancement of proton conductivity and methanol resistance of sulfonated poly(phthalazinone ether sulfone ketone)/superacid sulfated zirconia composite membranes for direct methanol fuel cells

Composite proton exchange membrane for fuel cells based on chitosan modified by acid-base amphoteric nanoparticles

Crosslinked Hybrid Membranes Based On Sulfonated Poly(Ether Ether Ketone)/Gamma-Methacryloxypropyltrimethoxysilane/Phosphotungstic Acid By An In Situ Sol-Gel Process For Direct Methanol Fuel Cells

Modifying A Proton Conductive Membrane By Embedding A "Barrier"

Phosphorylated poly(ethylene- co -vinyl alcohol) doping for enhanced proton conductivity and mechanical properties of side chain–type sulfonated poly(aryl ether ketone) proton-exchange membranes

Advanced proton exchange membrane prepared from N-heterocyclic poly(aryl ether ketone)s with pendant benzenesulfonic moieties and performing enhanced radical tolerance and fuel cell properties

Polydopamine-coated polyimide nanofiber to anchor HPW and construct the pocket-like composite membrane with excellent proton conductivity and stability

Hydrocarbon-Based Composite Membrane Using LCP-Nonwoven Fabrics for Durable Proton Exchange Membrane Water Electrolysis

Friedel-Crafts self-crosslinking of sulfonated poly(etheretherketone) composite proton exchange membrane doped with phosphotungstic acid and carbon-based nanomaterials for fuel cell applications

A facile, effective thermal crosslinking to balance stability and proton conduction for proton exchange membranes based on blend sulfonated poly(ether ether ketone)/sulfonated poly(arylene ether sulfone)

Phosphonic Acid Grafted Polybenzimidazoles Containing Pyridine for Stable High-Temperature Proton Exchange Membrane Fuel Cells

Phosphonate poly(vinylbenzyl chloride)-Modified Sulfonated poly(aryl ether nitrile) for Blend Proton Exchange Membranes: Enhanced Mechanical and Electrochemical Properties

Reinforced Composite Membranes Based on Expanded Polytetrafluoroethylene Skeletons Modified by a Surface Sol–Gel Process for Fuel Cell Applications

Surface Modification of Heteropoly Acid/speek Membranes by Polypyrrole with a Sandwich Structure for Direct Methanol Fuel Cells