Abstract:Abstract High-temperature heat pipe is an ideal technical solution for microreactors applied for space missions, planet surface, and the small electricity markets on the ground. However, the internal fluid flow state and the effects of key parameters such as permeability, porosity, and capillary force of wick structure on the distribution of working fluid inside the heat pipe are difficult to measure experimentally. In this study, a general CFD model for heat pipe with wick structure that can predict the thermal behavior at different steady-state conditions was carried out. The thermal conduction through heat pipe shell, liquid film on the inner surface, and the formation of liquid reservoir at the bottom of heat pipe were considered in this model. A high-temperature heat pipe model considering the flow of liquid working fluid inside the wick structure was developed based on the Star-CCM+ numerical simulation software. The model used a combination of the liquid film model and the Volume of Fluid (VOF) model to simulate the effects of fluid flow and collection behavior inside the wick structure on the heat transfer characteristics of the heat pipe. The method included models for flow resistance and capillary driving force under steady-state conditions, centrifugal force and time-varying gravitational field under motion conditions, and mixed convective heat transfer caused by motion conditions. The accuracy of the numerical simulation was validated using typical potassium high-temperature heat pipe experiments. The effects of different permeability and capillary force characteristics of the wick structure on heat transfer and internal fluid distribution in the heat pipe were studied. Based on the current method, high-temperature heat pipes with different inclinations (0°, 90 °and 45°) were investigated. Additionally, non-uniform heating boundary conditions were added to the high-temperature heat pipe evaporator section to investigate its heat transfer performance under real reactor axial power input. This investigation lays the foundation for the design and analysis of the heat transfer characteristics of high-temperature heat pipes.

Analysis of Heat Transfer in Canular Space in Separate Type Heat Pipe

Theoretical and Experimental Research on Heat Transfer Performance of the Semi-Open Heat Pipe

Design and Experimental Analysis of Grooved Flat Aluminum Heat Pipe

Modeling and Analysis of Two-Phase Distribution in Large-Scale Separate Heat Pipe

Analysis of Flow and Heat Transfer in Evaporator Porous Wicking Structure of A Flat Heat Pipe

CFD Analysis on the Multiphase Flow of the Wickless Sodium Heat Pipe with Non-condensable Gas

Numerical Research on Heat Transfer Characteristics of Evaporation Segment of Separate Type Heat Pipe

Numerical Investigation of High-Temperature Heat Pipes with Different Wick Structures under Non-Uniform Heating Boundary Conditions

Experimental Studies on a Novel Thin Flat Heat Pipe Heat Spreader

Numerical investigation into the gas-liquid two-phase flow regime and heat transfer characteristics in a gravity heat pipe

Design and Analysis of Heat Pipe Heat Exchanger Efficiency

HEAT TRANSFER CHARACTERISTICS OF AN INNOVATIVE GRAVITY HEAT PIPE

Design and analysis of grooved heat pipe

Experimental investigation of heat transfer characteristics of small spiral-tube evaporating section in a segregation-type heat pipe

Entransy Dissipation Analysis and Optimization of Separated Heat Pipe System

Analysis on heat transfer characteristics of separated helical heat pipe in cool storage system

Performance Analysis and Optimization of Heat Pipe-Based Radiator for Space Fission Power System Thermal Management

Heat Transfer Performance Analysis of a Large-Scale Separate Heat Pipe with a Built-in Tube

Visualization research on influencing factors of flat heat pipes

Experimental and simulation study on flow heat transfer characteristics of flat pulsating heat pipe with wide and narrow interphase channels

Heat transfer performance on unequal-diameter pulsating heat pipe