Influence of Rheological Parameters on Static Stability of Self-Compacting Concrete Equivalent Mortar

Kunlin MA,Jin FENG,Guangcheng LONG,Youjun XIE,Xiaobo CHENG

DOI: https://doi.org/10.14062/j.issn.0454-5648.2017.02.04

2017-01-01

Abstract:The plastic viscosity and thixotropy of self-compacting concrete equivalent mortar (SCCEM) were tested by rotational viscometer. The surface bubbles characteristics of mortar with different plastic viscosities and thixotropies were investigated by a self-designed filling-box device. Two parameters of surface bubbles ratio (SBR) and surface bubble diameter (SBD) of hardened mortar were used to characterize the static stability of mortar. The results show that the plastic viscosity and thixotropy both have great influences on SBR and SBD. Compared to the thixotropy, the correlation between the plastic viscosity and SBR/SBD is better. SBR and SBD of mortar decrease dramatically with the increasing plastic viscosity. When plastic viscosity is no less than 3.5 Pa·s, SBR is less than 5% and SBD larger than 5 mm is close to zero. SBR of mortar reduces with the increasing thixotropy. SBR is almost less than 10% when the thixotropy of fresh mortar is more than 12.5×103Pa/s. When the plastic viscosity is more than 3.5 Pa·s and the thixotropy of fresh mortar is more than 12.5×103Pa/s, SCCEM has a good static stability.