Abstract:Due to the escalating demands for computational power, coupled with a continuous reduction in the size of electronic packaging, thermal management for electronic devices has become increasingly critical in recent years. Ensuring that the temperature of electronic chips remains below a certain threshold is essential, since overheating can result in a decline in performance and chip breakdowns. To address the intensive cooling needs of heat-emitting chips, a variety of devices and methods have been explored, such as heat pipes, vapor chambers, pool boiling, spray cooling, and jet impingement cooling. Tailoring thermal and chemical characteristics of the target heated surface is one of the key factors in enhancing heat removal efficiency. This study highlights the critical role of employing advanced surface engineering techniques which particularly focuses on the integration of a novel semi-layered microporous copper structure, developed in conformity with a multi-level micro-cubic pin fin silicon substrate. The semi-layered microporous copper structure is fabricated using polystyrene sphere as the template to assist the electrodeposition of copper, with a low current density being employed to ensure meticulous fabrication. The initial gradient of the muti-level substrate is defined using silicon dioxide as the mask, setting the depth to encapsulate the PS template effectively. This foundational layer is crucial for confining the PS template securely in place. The second gradient is defined using photoresist as the mask to etch micro pin fin structures into the substrate, aimed at enhancing the adhesion between the substrate and the PS template and expand the heat exchange area. This meticulous structuring prevents the template from detaching during large-scale electroplating operations, ensuring the integrity of the micro fabrication process. The semi-layered microporous copper and the multi-level micro-cubic pin fin silicon substrate are both strategically designed to augment nucleation sites and enlarge the heat exchange surface area during the boiling heat transfer process within a pool boiling system. Further enhanced by the jet flow disturbances aimed directly at the heat transfer surface, facilitating rapid bubble removal and liquid replenishment, which contributes to delaying the onset of dry out. By employing Novec 649 as the coolant under a jet flow rate of 2.5L/min, we've reached a critical heat flux of 90/Wcm2 on a semi-layered microporous copper structure over a large heated area of 1.5 x 1.5 cm. This research provides valuable knowledge that can inform the development of highly effective surface engineering designs in high heat flux management systems.

Pool boiling heat transfer performance and mechanism of square copper pillar arrays with partially-modified surface

The pool boiling heat transfer characteristics of the surface modified copper square pillar arrays

Experimental and Numerical Investigation on Bubble Behaviors and Pool Boiling Heat Transfer of Semi-Modified Copper Square Pillar Arrays

Visualization-based nucleate pool boiling heat transfer enhancement on different sizes of square micropillar array surfaces

Experimental Investigation of Pool Boiling Heat Transfer on the Radial Micro-Pillar Surfaces

Numerical investigation on pool boiling heat transfer with trapezoidal/inverted trapezoidal micro-pillars using LBM

Experimental Study of Pool Boiling Heat Transfer on Novel Bistructured Surfaces Based on Micro-Pin-finned Structure

Experimental investigation of pool boiling heat transfer on pillar-structured surfaces with different wettability patterns

An experimental investigation of pool boiling augmentation using four-step electrodeposited micro/nanostructured porous surface in distilled water

Experimental correlation for pool boiling heat transfer on metallic foam surface and bubble cluster growth behavior on grooved array foam surface

Experimental study on pool boiling enhancement by unique designing of porous media with a wettability gradient

The Pool Boiling Heat Transfer and Critical Vapor Column Coalescence Mechanism of Block-Divided Microstructured Surfaces

EXPERIMENTAL STUDY OF POOL BOILING ON SURFACE OF METAL FOAM WITH OPEN CELLS

Progress in enhanced pool boiling heat transfer on macro- and micro-structured surfaces

Pool Boiling Enhancement Via Surface Engineering for Thermal Management

Experimental Investigation on Pool Boiling Mechanism of Two-Level Gradient Metal Foams in Deionized Water, Aqueous Surfactant Solutions and Polymeric Additive Solutions

Enhanced pool boiling heat transfer characteristics on microstructured copper surfaces coated with hybrid nanofluid

Simulations of Saturated Boiling Heat Transfer on Bio-Inspired Two-Phase Heat Sinks by a Phase-Change Lattice Boltzmann Method

Two-dimensional Mesoscale Simulations of Saturated Pool Boiling from Rough Surfaces. Part II: Bubble Interactions above Multi-Cavities

Numerical study on heat and mass transfer characteristics of surface wettability

Experimental and parametric study in pool boiling enhancement with self-induced jet impingement on the microporous copper surface using R1336mzz(Z)