Abstract:The boiling flow and heat transfer performance of four different pin-fins in microchannels are investigated through visualization experiment research. Flow boiling visualization results have been conducted by using deionized water as working fluid with circulating under flow rates in the range of 0.25~9kg/h, with the inlet temperature as 30 ℃ and heating power as 126W. The experimental results show that the flow patterns in the channel are mist flow, annular flow, isolated bubble and no bubble. And the flow pattern corresponds to the pressure change. With the increase of Re, the pressure drop in the microchannel first increases rapidly, then decreases, and finally increases again. The change process of pressure drop corresponds to the bubble heat transfer process. The corresponding heat transfer processes include film boiling、transition from film boiling to nucleation boiling、nucleation boiling and single-phase convection. At the same time, the state of bubbles in the channel can correspond to the intensity and mode of heat transfer. The average surface temperature of the bottom plate decreases with the increase of Re. The average convective heat transfer coefficient increases, then decreases and increases again with the increase of Re. The twice increases are mainly due to liquid film evaporation and single-phase flow transition. The average convective heat transfer coefficient increases with the increase of heat flux. And in four different micro-fin shapes, the heat transfer effect of triangle fin array is the best, because the disturbance of triangle to fluid is the most intense. While in the nucleation boiling region, the convective heat transfer coefficient of triangle micro-fin arrays is the largest. At that stage, the bubbles in triangle micro fin array grow and separate more easily.When the Re is less than 130, the number of bubbles in the triangle micro array is great than that in the ellipse micro array, and the bubble departure diameter is the largest, as well. And the bubble growth time and bubble waiting time are the shortest. When Re is greater than 130, the number of bubbles in the channel is relatively small, and the nucleation boiling intensity decreases. When the Re continues to increase, there are few or no bubbles in the channel, which is close to the single-phase convection. Moreover, the pressure drop, bottom temperature and convective heat transfer coefficient of triangle micro fin array change most obviously. The results show that when Re increases from 30 to 125, the bottom temperature decreases by 41 ℃, the maximum convective heat transfer coefficient reaches 16800 w / m2 · ℃, and the maximum Nu is 10.

Visualized investigation of subcooled boiling in variable cross-section fin channels

Experimental Study of Boiling Heat Transfer and Flow Characteristics in Fin Channels with Variable Cross Section

Experimental Study of Flow Boiling Instabilities in Horizontal Tubes under Gas–liquid Stratification Condition: Effects of Heat Flux and Inlet Subcooling Degree

Effects of Heat Flux, Mass Flux, Inlet Fluid Subcooling, and Channel Orientation on Subcooled Flow Boiling in a High-Aspect-Ratio Rectangular Microchannel

Local Heat Transfer in Subcooled Flow Boiling in a Vertical Mini-Gap Channel

Heat Transfer Characteristics and Flow Pattern Visualization for Flow Boiling in a Vertical Narrow Microchannel

Visualization Study on Bubble Dynamical Behavior in Subcooled Flow Boiling under Various Subcooling Degree and Flowrates

Experimental Study on Local Subcooled Flow Boiling Heat Transfer in A Vertical Mini-Gap Channel

The Experimental Research on Subcooled Flow Boiling in Vertical Narrow Rectangular Channels with Relatively Wide-Ranged Parameters

Investigation on visualization and heat transfer performance study of the mini-channel flow boiling

3-D numerical study of subcooled flow boiling in a horizontal rectangular mini-channel by VOSET

The Influence of Subcooling on Nucleate Boiling Heat Transfer in an Immersed Confined Space

Numerical Investigation of Subcooled Flow Boiling in an Inclined Rectangular Mini-Channel at a Low Flow Rate

Direct numerical simulation of bubble dynamics and heat transfer during nucleate boiling on the micro-pin-finned surfaces

Experimental Study of Saturated Flow Boiling Heat Transfer in an Array of Micro-pin-fins

Experiment study of flow boiling heat transfer characteristics in horizontal rectangular channel

Experimental study on the effect of shape on the boiling flow and heat transfer characteristics of different pin-fin microchannels

Numerical investigation of critical heat flux during subcooled flow boiling in a vertical rectangular Mini-channel

Simulation of Subcooled Flow Boiling in a Micro-Channel

Experimental Investigations of Two-Phase Boiling Flow in A Complicated Channel