Abstract:Methyl-2-(4-hydroxyphenoxy) propionate is an important intermediate for the synthesis of aryloxyphenoxy propionate (APP) high efficiency herbicides. There is a certain gap between the existing products and the process demand, such as the particle size and the distribution of particle size. Central composite design (CCD), a kind of response surface methodology, was used to explore the effects of stirring rate, cooling rate, seeding quantity and aging time on the particle size of methyl-2-(4-hydroxyphenoxy) propionate and the coefficient of variation (C.V.) of methyl-2-(4-hydroxyphenoxy) propionate. Based on the regression analysis, regression equations related to response values and factors were established, respectively. For crystal size, the most significant parameter was aging time, then was seeding quantity, and last were stirring rate and cooling rate. For crystal size distribution, the most significant parameter was stirring rate, then was seeding quantity, and last were aging time and cooling rate. The interaction between stirring rate and seeding quantity, stirring rate and aging time, were significant, too. The crystallization process was optimized as follows: stirring rate of 400 rpm, cooling rate of 5C·h -1 , seeding quantity of 2.5g, and aging time of 20 min. In the above conditions, methyl-2-(4-hydroxyphenoxy) propionate were prepared and its purity reached above 98%, with an average particle size of 1054.27μm and a more concentrated size distribution, with the C.V. in 0.8913. The errors between the predicted and experimental values were small, which showed that the established models were accurate and reliable for the analysis and prediction of the process of reactive crystallization.

Optimization of reactive extraction-crystallization process based on response surface methodology

Optimization of preparation of calcium carbonate from continuous crystallization process of ammonium carbonate and conversion of calcium sulfate by response surface methodology

Design and Optimization of the Preparation of Calcium Carbonate from Calcium Sulfate and Ammonium Bicarbonate

Preparation of Calcium Carbonate and Hydrogen Chloride from Distiller Waste Based on Reactive Extraction–crystallization Process

Optimization of Volatile Fatty Acid Production with Co-Substrate of Food Wastes and Dewatered Excess Sludge Using Response Surface Methodology

Optimization of Purification Treatment of Spent Cathode Carbon from Aluminum Electrolysis Using Response Surface Methodology (RSM)

Polymorph transformation and formation mechanism of calcium carbonate during reactive extraction-crystallization process

Optimization of Crystallization Process of Methyl-2-(4-Hydroxyphenoxy) Propionate Based on Responsive Surface Methodology

Process Optimization for Microcystin-Lr Degradation by Response Surface Methodology and Mechanism Analysis in Gas-Liquid Hybrid Discharge System

A Modified Method for Modelling, Optimization and Control of an Anti-Solvent Crystallization Process

Chloride removal from sewage using bismuth trioxide: Characterization and optimization by response surface methodology (RSM)

Optimization of the ultrasonic extraction technique of glycyrrhizic acid by using response surface methodology

Modeling and Optimization of the Electric Flocculation of Wastewater Containing Cr6+ Using Response Surface Methodology

Digital Design of an Agrochemical Crystallization Process via Two-Dimensional Population Balance Modeling

Modeling and Optimization of the Coagulation of Highly Concentrated Coking Wastewater by Ferrous Sulfate Using a Response Surface Methodology

Optimization of operating parameters for sludge process reduction under alternating aerobic/oxygen-limited conditions by response surface methodology.

Optimization of Methane Fermentation from Effluent of Bio-Hydrogen Fermentation Process Using Response Surface Methodology

Modeling and Optimization of the Para-Xylene Continuous Suspension Crystallization Separation Process via a Morphology Technique and a Multi-Dimensional Population Balance Equation

Study on Solubility of CaSO4 in K-Na-Mg-Cl System Based on Response Surface Methodology

Coupled reaction and solvent extraction process to utilize distiller waste using N235-isoamylol system

Optimization of parameters during phosphoric acid production using response surface methodology: toward a biomimetic process