Nitrogen removal of wastewater from PU synthetic leather production by MBBR

Qing WANG,Yuan-hong DING,Hong-qiang REN,Min-min LIU,Yi QIAN

DOI: https://doi.org/10.3969/j.issn.1009-2455.2016.01.005

2016-01-01

Abstract:Anoxic-aerobic MBBR was used to remove TN, NH3-N and organic matters, while anoxic MBBR was used to remove NO3--N. The test results showed that, when the mass concentrations of TN and NH3-N of the influent water were 150 ~ 300 and 50 mg/L respectively, the removal rates of them by anoxic-aerobic MBBR were above 89.7% and 84.0% respectively, the effluent water quality could meet the relevant requirement of GB 21902-2008 Emission Standard of Pollutants for Synthetic Leather and Artificial Leather Industry(ρ(NH3-N) <8 mg/L, ρ(TN) < 15 mg/L). As low carbon-nitrogen ratio could result in NO2--N accumulation, maintaining carbon-nitrogen ratio at about 3.5 during the process of PU synthetic leather wastewater treatment by MBBR could realize an effective removal of nitrogen. On the other hand, about 98.2% of NO3--N and NO2--N were re-moved by anoxic MBBR, when the carbon-nitrogen ratio was low, NO2--N accumulation was exist; however, when the carbon-nitrogen ratio was increasing continuously, the TN concentration decreased, which indicated that, an outstanding denitrification performance of the anoxic MBBR could be obtained when the mass concentration of nitrate nitrogen was as high as 300 mg/L.