Abstract:The combination of raw animal skin manufacturing processes involves the use of large amounts of chemicals, resulting in the generation of complex and highly polluted tannery wastewater. In this context, the high concentration of chloride in tannery wastewater represents a crucial bottleneck. Indeed, sodium chloride, commonly used in tannery industry to prevent skin rot, increases the concentration of chlorides up to 50 %. At the same time, most of the advanced oxidation processes usually employed in tannery wastewater treatment to remove recalcitrant COD involve the use of conditioning agents, thus increasing the overall concentration of chlorides in the treated effluent. The aim of this study was to evaluate the electrochemical peroxidation process (ECP) efficiency in the treatment of tannery wastewater without changing pH, to improve Fenton technology by avoiding the use of chemicals. The influence of different electric currents on COD and color removal was investigated. The characterization of the produced sludge was conducted through FTIR, SEM and XRD analysis, exploring the morphology and composition of precipitate, depending on the applied current. Although an electrical current of 750 mA yields the highest COD and color removal efficiency (69.7 % and 97.8 %, respectively), 500 mA can be considered the best compromise because of energy consumptions. Iron oxides and hydroxides were generated during the ECP process, playing the role of coagulants through the absorption of organic and inorganic contaminants. The consumption of energy increased as a function of time and applied current; however, cost analysis showed that the electrodes contributed the most to the total cost of the process. In authors' knowledge, the application of ECP process as a tertiary treatment for the removal of recalcitrant COD in tannery wastewater represents a novelty in the literature and the results obtained can be considered as the basis for scaling up the process in future research.

Treatment of Leather Industry Wastewater Using Coagulation, Ultraviolet/Persulfate Processing and Nanofiltration for Water Recovery

DYEING WASTEWATER TREATMENT AND REUTILIZATION THROUGH ULTRAFILTRATION AND NANOFILTRATION INTEGRATED MEMBRANE PROCESSES

Pretreatment of a textile wastewater from alkali reduction,printing and dyeing operations

Analysis of the Capacity of the Fenton Process for the Treatment of Polluted Wastewater from the Leather Dyeing Industry

Efficient treatment of leather wastewater using a combination of CEPT and SBR with a novel flocculant

Valorization of agitated thin film dryer (ATFD)-mixed-salt from textile wastewater for its application in leather manufacturing – a sustainable approach

Landfill Leachate Treatment by Coagulation/flocculation Combined with Microelectrolysis-Fenton Processes

Experimental research on the removal of nitrogen from PU synthetic leather wastewater by combined process anaerobic MBBR and aerobic MBR

Efficient and sustainable treatment of tannery wastewater by a sequential electrocoagulation-UV photolytic process

A Fenton-based approach at neutral and un-conditioned pH for recalcitrant COD removal in tannery wastewater: Experimental test and sludge characterization

Removal of COD and Color from Textile Wastewater by the Fenton and UV/H2O2 Oxidation Processes and Optimization

Catalytic ozonation of textile wastewater as a polishing step after industrial scale electrocoagulation

Hybrid process combining ultrafiltration and electro-oxidation for COD and nonylphenol ethoxylate removal from industrial laundry wastewater

Comparison of coagulation–Fenton oxidation and coagulation–adsorption processes in textile and chemical industry mixed wastewater

Enhancement of COD Removal from Oilfield Produced Wastewater by Combination of Advanced Oxidation, Adsorption and Ultrafiltration

Treatment of light polluted wastewater from cotton knitting dyeing and finishing by coagulation-ozone oxidation process with wastewater source separation

Treatment of wastewater from dye manufacturing industry by coagulation

Treatment of alkaline wastewater from synthetic rubber production by coagulation and biological contact oxidation

Sustainable wastewater treatment by RO and hybrid organic polyamide membrane nanofiltration system for clean environment

Electrochemical Treatment of a Real Textile Wastewater Using Cheap Electrodes and Improvement in Cod Removal

Taguchi Method and Response Surface Methodology in the Treatment of Highly Contaminated Tannery Wastewater Using Commercial Potassium Ferrate