Abstract:The oxetane-modified polysiloxane (Oxe-PSiO) was synthesized via the partial hydrolysis/condensation of tetraethyl orthosilicate (TEOS) and then transesterification reaction with 3-ethyl-3-(hydroxymethyl) oxetane (EHO), and characterized by FT-IR, H-1 NMR, C-13 NMR, and Si-29 NMR spectroscopy. Using the water/TEOS molar ratios of 0.8-1.2, the number-average molecular weights and polydispersity indices were obtained by GPC to range from 1.013 to 2.716 g mol(-1) and around 2.0, respectively. The viscosity of Oxe-PSiO prepared from the water/TEOS molar ratio of 1.2 sharply increased to 177,545 cps from 438 cps of that from the molar ratio of 0.8. A series of cationic UV-curable formulations were prepared by blending the Oxe-PSiO synthesized with the water/TEOS molar ratio of 1.0 into an commercial oxetane-based resin, 3,3'-[oxydi(methylene)]bis(3-ethyloxetane), in different weight ratios. The photopolymerization kinetics studied by photo-DSC in the presence of tri-phenylsulphonium hexafluoroantimonate as a cationic photoinitiator showed that both the maximum photopolymerization rate and final oxetane conversion in the cured film decreased with increasing Oxe-PSiO loading mainly due to the sharp increase in viscosity. The DMTA and DSC results both indicated the improvement in thermal stability, showing 12 and 13.4 degrees C, respectively, higher T-g for the cured film with 50 wt % Oxe-PSiO loading compared with the pure polymer. Moreover, the temperatures (T-10% and T-50%) at the weight loss of 10 and 50% and final char yields measured by TGA increased with increasing Oxe-PSiO content. After adding 50 wt % Oxe-PSiO, compared with the pure polymer the T-10% increased from 349 to 361 degrees C, while the T-50% increased from 409 to 424 degrees C, and with a char yield increase of 8.2% at 800 degrees C. In addition, its greatly increased crosslinking density due to the formation of silica network resulted in the enhancement in pencil hardness from B of the pure polymer to 2H grade. (C) 2011 Wiley Periodicals, Inc. J Appl Polym Sci 123:717-724, 2012

Synthesis and Characteristic of Polysiloxane with Ultraviolet Absorbing Groups of Benzophenone

Characterization of Coloring Structure Unit of Polysiloxane Modified Polyurethane Latex

Synthesis of Polyether-grafted Polysiloxanes and Its Application in Metal Cleanser

Synthesis and Characterization of Eugenol‐based Silicone Modified Waterborne Polyurethane with Excellent Properties

The Effect of Silane Coupling Agent Containing Methacryloxy Group on UV-Curable Acrylate-Modified Polyurethane/SiO2 Hybrid Coatings

Synthesis and characterization of crosslinkable hydrophilic polysiloxane

Synthesis and Characterization of a New UV Cross‐linkable Waterborne Siloxane‐polyurethane Dispersion

Synthesis and Properties of Nanosilica‐reinforced Polyurethane for Grouting

Synthesis of Poly(methyl (trifluoropropyl) Siloxane) and Its Crosslinking Characteristics

Synthesis of UV crosslinkable waterborne siloxane–polyurethane dispersion PDMS-PEDA-PU and the properties of the films

Synthesis and characterization, second-order nonlinear optical and photorefractive properties of new multifunctional polysiloxane with broad optical transparent pentafluorophenyl azo chromophore

The Synthesis and Properties of Moisture-curing Polyurethane/Polysiloxane Copolymers

Polysiloxanes with Quaternary Ammonium and Polyether Groups for Silyl-Terminated Polypropylene Oxide Waterborne Emulsions

Application of polysiloxane with both polyether and derivative of benzophenone groups

Synthesis and Characterization of Polysiloxanes Containing Carbazolyl and Sulfonyl-Indole Based Chromophore As Side Chains

Synthesis and properties of oxetane-based polysiloxanes used for cationic UV curing coatings

Cationic Uv Curing Behavior and Thermal Properties of Oxetane-Modified Polysiloxane Prepared from Tetraethyl Orthosilicate

Synthesis and Second‐order Nonlinear Optical Properties of Multifunctional Polysiloxanes with Sulfonyl‐based Chromophores

Polybenzoxazine containing polysilsesquioxane: Preparation and thermal properties

Synthesis and Characterization of Novel Organosilicon‐modified Polyurethane

Preparation and properties of silicon-containing benzoxazine with high thermal stability