Abstract:A series of CeO2 supports with particular morphologies (nanorods, nanocubes, nanooctas, and nanoparticles) were successfully fabricated by controlling the parameters of the hydrothermal method. The obtained nano-CeO2 materials were utilized as the supports of the Ni-based CO2 methanation catalysts prepared by the incipient impregnation method. It was found that the catalyst supported on the CeO2 nanoparticles (5Ni/NPs) exhibited much higher catalytic activity and better stability than those of catalysts with other morphological CeO2 supports. Thus, the catalytic performance of Ni/CeO2 catalysts could be facilely tuned and optimized by precisely designing the morphology of the CeO2 support. The XPS, CO2-TPD, and H2-TPR characterizing techniques showed that Ni-based catalysts supported on nano-CeO2 with varied morphologies displayed different catalytic performances. It was supposed that the typical merits, such as the abundant oxygen vacancy, medium basic sites, moderate metal-support interaction, excellent reduction ability, etc., were considered as the main origins for the enhancement of the low-temperature catalytic activities. Furthermore, the kinetic study revealed that the Ni-based catalysts supported on the nano-CeO2 with varied morphologies performed the different apparent activation energies toward CO2 methanation. The specific reaction intermediates and possible reaction pathways were carefully investigated through the in-situ DRIFTS and online TPSR techniques. Overall, this work would provide new perspectives that the roles of the morphology effect of the support ought to be emphatically considered when designing new catalysts.

Effect of Ca promoter on methanation of supported Ni/TiO2 catalysts

Effect of support texture properties on Ni-Fe/γ-Al_2O_3 catalyst structure and catalytic performance for CO methanation

Effect of Ca Promoter on the Structure, Performance, and Carbon Deposition of Ni-Al 2 O 3 Catalyst for CO 2 -CH 4 Reforming

Promotion effect of TiO2 on Ni/SiO2 catalysts prepared by hydrothermal method for CO2 methanation

Effect of Ni Precipitation Method on CO Methanation over Ni/TiO 2 Catalysts

Effect of Ni Precipitation Method on CO Methanation over Ni/TiO2 Catalysts

Effect of Citric Acid on the Synthesis of Co Methanation Catalysts with High Activity and Excellent Stability

Characterization of Ca-promoted Ni/α-Al2O3 Catalyst for CH4 Reforming with CO2

CO2 Methanation on the Catalyst of Ni/MCM-41 Promoted with CeO2

Effects of Promoters and Preparation Procedures on Reforming of Methane with Carbon Dioxide over Ni/Al2O3 Catalyst

Methanation of CO 2 over Y b-Promoted Ni/Al 2 O 3 Catalysts Prepared by Solution Combustion

Effect of La, Mg and Mo Additives on Dispersion and Thermostability of Ni Species on Kit-6 for Co Methanation

Mn and Mg Dual Promoters Modified Ni/α-Al2O3 Catalysts for High Temperature Syngas Methanation

CO2 methanation over Ca doped ordered mesoporous Ni-Al composite oxide catalysts: The promoting effect of basic modifier

Effect of Promoters on Steam Reforming of Toluene over a Ni-Based Catalyst Supported on Coal Gangue Ash

Role of Ca in Ni-Ca/Fumed-SiO2 Catalysts for CO2 Catalytic Conversion to Methane

Nitrogen-Doped Ni/TiO 2 Catalyst with Enhanced Activity and Improved Selectivity for CO 2 Methanation

Performance of supported nickel catalyst for reforming of CH 4 with CO 2 to syngas: II . Effect of basic promoters

Promotional Effect of Ni−Sn Interaction over Ni Supported on Sn‐incorporated MCM‐41 Catalysts for CO 2 Reforming of CH 4

CO2 Methanation over the Ni-based Catalysts Supported on Nano-Ceo2 with Varied Morphologies

Iron promoted MOF-derived carbon encapsulated NiFe alloy nanoparticles core-shell catalyst for CO2 methanation