Abstract:Graphene and Glass fiber influence on Tensile toughness. This research investigates the influence of graphene and some additives on the mechanical behavior of polypropylene (PP). Anhydride maleic coupling agent (MAPP), graphene nanoplatelets (GNPs), and glass fiber (GF) were incorporated into the polymer matrix. The incorporation of MAPP and/or GNP significantly improved the affinity between the PP matrix and fibers while altering the surface morphology. More than 60% of the fibers showed a dimension lower than 0.5 mm. The tensile strength increased from 27.45 to 41 MPa for the neat PP compared to one of the composites. The strength modulus varied from 0.5 to 0.9 GPa. Mechanical tests showed that the addition of MAPP improved the tensile toughness (from 27.45 to 41 N mm mm−2) by 49%, while the GF increased tensile strength, albeit reducing elongation at break. The dynamic mechanical thermal analysis uncovered distinct behavioral variations among fiber‐reinforced samples, particularly in modulus peak differences. In rheological assessment, the presence of GF notably increased viscosity within certain shear rate ranges (at 100 [1/s], the viscosity goes from 200 to 300 Pa s to neat PP for some composites). This research highlights how chosen additives can influence a PP homopolymer's properties, offering useful insights for practical material processing and design. Highlights MAPP and GNP can increase PP and glass fiber interfacial bonding. Glass fiber raises tensile strength and decreases elongation. Sample with just GNP has a rougher surface, implying better energy dissipation. Glass fiber raises viscosity in the observed shear rate ranges. DMA demonstrates that MAPP and GNP have an influence on energy dissipation.

Performances of Toughened and Reinforced Polypropylene

Enhancement on the properties of polypropylene using bamboo particles: Effect of particle sizes and loadings

Research on Toughening Modification of Copolymerized Polypropylene Using Polyolefin Elastomers

Study on Properties of Modified Bamboo Fiber Reinforced Polypropylene Composites

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Toughening Polypropylene by Tiny Amounts of Fillers

STUDY ON FABRICATION AND SYNERGISTIC EFFECTS OF POLYPROPYLENE COMPOSITES FILLED WITH COMPOUND INORGANIC PARTICLES

Toughness mechanism in polypropylene composites: Polypropylene toughened with elastomer and calcium carbonate

Fabrication and toughening mechanism of high toughness PP/SEBS/HDPE blends with core‐shell particles

Recent Progress in Toughening Polypropylene

Toughness of long glass fiber reinforced polypropylene composites

Synergistic Improvement of Toughness of Isotactic Polypropylene: the Introduction of High Density Polyethylene and Annealing Treatment

Research Progress in the Toughening and Strengthening of Polypropylene Via Inorganic Rigid Particles

Improving the Impact Strength of Polypropylene/carbon Fiber Composites Via Β‐modification and Annealing Treatment

Toughening with Little Rigidity Loss and Mechanism for Modified Polypropylene by Polymer Particles with Core–shell Structure

Morphology And Properties Of Halloysite Nanotubes Reinforced Polypropylene Nanocomposites

Tensile Deformation Mechanisms of Polypropylene/elastomer Blends Reinforced with Short Glass Fiber

Mechanical behavior of carbon/glass polypropylene hybrid composites

Polypropylene toughened with ethylene-n-butyl acrylate-carbon monoxide terpolymer: structure–property relationship

In Situ Anionic Polymerization and Mechanical, Thermal and Morphological Properties of Toughened and Volume-Enhanced Blends of Poly(lactic Acid)

Morphology and Properties of Short R-PET Fiber Reinforced PP Composites