Abstract:Nowadays, lithium-ion batteries have been considered to be the superior commercial batteries in the market, thanks to their high energy density (until ca. 250 Wh/kg at cell level) and low fabrication cost (actually < 0.3 Euro/Wh at cell level). However, due to the recent global push for electrification, there is a constant need to further improve battery performance while minimalizing the cost. Besides the development of new battery materials, engineering the electrodes could be a valid solution to meet such demand. By increasing the electrode thickness to 200 μm, the active material loading in the electrode is expected to increase to over 30 wt%, hence enhancing the energy density and limiting the cost at the cell level. Nevertheless, thick electrodes fabricated by conventional coating methods suffer severely from weak mechanical strength and delamination as well as long and highly-tortuous Li-ion diffusion path, sluggish electrochemical kinetics, and poor charge/discharge rate performance. Recently, great attention has gone to 3D printing (additive manufacturing) with the promise to overcome these limitations, thanks to the porous structures of the 3D- printed electrodes. In this work, we present 450 μm thick lithium iron phosphate (LFP) electrodes produced by 3D micro-extrusion with a superior LFP loading of ca. 30 mg/cm 2 and a high areal capacity of ca. 4.2 mAh/cm 2 . Two commercial polymeric binders were employed, including carboxymethyl cellulose (CMC) and poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS). It is concluded that both CMC and PEDOT:PSS are essential to obtain well-printed 3D electrodes. While CMC contributes significantly to the mechanical strength of the 3D-printed LFP electrodes, it is of great importance to add PEDOT:PSS to avoid intra-fiber cracks. Furthermore, the electrodes containing both binders have shown significantly improved specific capacity at different C-rates compared to those formulated from either CMC or PEDOT:PSS. Further analyses give insights into charge transfer resistance, tortuosity and electrical conductivity of the investigated electrodes. Additionally, we highlight the difference in the battery performance of 3D-printed electrodes and their standard doctor-bladed counterparts. Reference (1) Kuang, Y.; Chen, C.; Kirsch, D.; Hu, L. Thick Electrode Batteries: Principles, Opportunities, and Challenges. Adv. Energy Mater. 2019 , 9 (33), 1901457. https://doi.org/10.1002/aenm.201901457.

3D printed lithium-ion battery electrode with low-tortuosity and ultra-thick hierarchical porous

3D-printed hierarchical porous and multidimensional conductive network based on conducting polymer/graphene oxide

3D Printing of Flexible Electrodes Towards Wearable Lithium Ion Battery

Preparation of lithium iron phosphate battery by 3D printing

Toward High Areal Energy and Power Density Electrode for Li-Ion Batteries via Optimized 3D Printing Approach.

3D Printable Ceramic–Polymer Electrolytes for Flexible High‐Performance Li‐Ion Batteries with Enhanced Thermal Stability

3D Printed Ordered Hierarchically‐Porous Electrodes for Developing High‐Performance Quasi‐Solid‐State Aqueous Nickel‐Iron Batteries

3D-Printed Porous GO Framework Enabling Dendrite-Free Lithium-Metal Anodes

Graphene Oxide‐Based Electrode Inks for 3d‐printed Lithium‐Ion Batteries

3D printing PEDOT-CMC-based high areal capacity electrodes for Li-ion batteries

3D‐Printed Microelectrodes with a Developed Conductive Network and Hierarchical Pores toward High Areal Capacity for Microbatteries

3D-Printed Lithium-Ion Battery Electrodes: A Brief Review of Three Key Fabrication Techniques

3D Architected Solid-State Lithium-Ion Battery

Elevated‐Temperature 3D Printing of Hybrid Solid‐State Electrolyte for Li‐Ion Batteries

3D printing of ultrathick natural graphite anodes for high-performance interdigitated three-dimensional lithium-ion batteries

3D printing of an anode scaffold for lithium batteries guided by mixture design-based sequential learning

3D printing of hierarchically micro/nanostructured electrodes for high-performance rechargeable batteries

Influence of Binders on Printability and Battery Performance of Thick 3D-Printed Positive Electrode for Li-Ion Batteries

Structural Optimization of 3D Porous Electrodes for High-Rate Performance Lithium Ion Batteries

Multi-Material Integrated Three-Dimensional Printing of Cylindrical Li-Ion Battery

Fabrication and Characterization of 3D-Printed Highly-Porous 3D LiFePO₄ Electrodes by Low Temperature Direct Writing Process.