Abstract:This study was aimed to remove cadmium ions from aqueous solutions by adsorption. Studies on the adsorption of cadmium ions by different activated carbons with different physical and chemical properties were reviewed and the adsorption mechanism,influence factors,favorable activation conditions,etc,discussed in this paper. As adsorbent,activated carbons were obtained from anaerobic digested residue of S.alterniflora by phosphoric acid activation using different activation conditions:various activation temperatures(400～700 ℃) and different acid/precursor impregnation ratios(0.5～3.0). Adsorption isotherms of cadmium ions were determined from solutions with different initial concentrate. Uptake of cadmium was found to be dependent on the preparation and activation procedure. This uptake increased as function of activation temperature for the H3PO4 activated carbons which could be attributed to the presence of some PO3-4 that may act as active centers contribute in cadmium adsorption. The results showed that an impregnation ratio and an activation temperature around 1 g H3PO4·g-1 anaerobic digested residue of S.alterniflora and 700 ℃,respectively,were recommended as the best combination of operating conditions to prepare activated carbons for cadmium adsorption. The maximum adsorption capacity reached 38.91 mg·g-1,which was superior to the ordinary commercial activated carbon on the market. The adsorption capacity of the investigated carbons increased with initial concentrate of solutions. The results revealed that obtained isotherms exhibited the model fitting according to Langmuir equation. The pH of solution and the surface chemistry of the carbons were found to play a decisive role in the uptake of cadmium ions from aqueous solutions rather than the carbon texture characteristics. It indicated that the investigated carbons removed appreciable amounts of cadmium ions which increased by increasing pH of solutions from 2 to 4. The data obtained provides a cost-effective technique in designing a treatment for cadmium-contained wastewater.

Preparation and adsorption of polymethacrylic acid modified activated carbon

Study on adsorption performance of polyacrylonitrile-based activated carbon fiber for trace of hexavalent chromium

Preparation, characterization and adsorption performance of mesoporous activated carbon with acidic groups

Preparation of Amine-Modified Mesoporous Activated Carbon and Its Adsorption of Lead(ii) from Aqueous Solution

Preparation,Characterization and Absorption Capability of Activated Carbon from Anaerobic Digested Residue of S.alterniflora

Efficient Adsorption of Ammonia by Surface-Modified Activated Carbon Fiber Mesh

The Treatment of Cadmium-contained Wastewater Using Activated Carbon Prepared from Anaerobic Digested Residue of S.alterniflora

The effect of the active carbonyl groups and residual acid on the ammonia adsorption over the acid-modified activated carbon

Performance of CO2 Adsorption on Modified Activated Carbons Derived from Okara Powder Waste: Impacts of Ammonia Impregnation

Adsorption performance of ammonium molybdate modified Salix wood flour biochar for the treatment of monosodium glutamate wastewater

Selective Adsorption of Anionic Dye from Solutions by Modified Activated Carbon

Nitrogen-Rich Polyaniline-Based Activated Carbon for Water Treatment: Adsorption Kinetics of Anionic Dye Methyl Orange

Preparation and adsorption of Cd2+ of attapulgite modified by AMPS

Synthesis and Characterization of Amylose Grafted Poly(acrylic Acid) and Its Application in Ammonia Adsorption.

Technological Process and Mechanics of Adsorption of Heavy Metal Cadmium by Modified Activated Carbon

Avocado Seed-Derived Activated Carbon for Mitigation of Aqueous Ammonium

Removal of amoxicillin from aqueous solution using sludge-based activated carbon modified by walnut shell and nano-titanium dioxide

Title : Effect of Na + impregnated activated carbon on the adsorption of NH 4 +-N from aqueous solution

The effect of pretreatment on the adsorption efficiency of activated carbon

Synthesis, characterization, and selective CO2 capture performance of a new type of activated carbon-geopolymer composite adsorbent

Boosting the adsorption capacity of activated carbon prepared from Amygdalus communis shells using physicochemical co-activation method