Abstract:Traditional timber bridges designs, while economical and durable, often have difficulty producing adequate stiffness for longer spans. Addition of FRP reinforcement has been shown to improve stiffness to a limited extent, but not nearly as much as it improves strength. To address the stiffness issue, a combined analytical/experimental pilot study is being conducted on a reinforced FRP glulam/concrete composite beam section. The section consists of a glued-laminated beam reinforced on the tension face with E-glass fiber reinforced composite. On the compression face, lag screws were driven into the wood beam before pouring the concrete slab to make the glulam beam and concrete slab composite. The stiffness of the beam was modeled using first order shear deformation theory based on available material properties. The load-deflection ratio was predicted for the limit case of a fully composite concrete slab and the limit case of no concrete slab. A nonlinear model based on moment-curvature analysis was developed and run to help quantify the increased strength and stiffness of the composite beam. An experimental program has been designed to better quantify the beam response and determine whether the strength and stiffness gained through the addition of the concrete in the compression zone sufficient to make up for the additional dead load. The wood used in the glulam was eastern hemlock, a low grade but abundant New England species. A longitudinal E-glass reinforcement mat was bonded to the wood with a phenolic adhesive through the wet lay up method. In order to control shear failure, some of the specimens were wrapped at the ends with additional E-glass shear reinforcement. To date, one beam has been loaded in three point bending within the linearly elastic range, and the results indicate that the stiffness gains are significant. Future tests will examine failure modes and the effects of shear reinforcing, as well quantifying strength gains based on economical amount of FRP reinforcing.

THE SUMMARIZATION OF RESEARCH AND APPLICATION OF WOOD STRUCTURE STRENGTHENED WITH FRP

Research of prestressed FRP in the reinforcement of timber beams

Flexural behavior of FRP reinforced glubam beams

Review of Experimental Studies on Application of FRP for Strengthening of Bridge Structures

Study on Flexural Behavior of Timber Beams Strengthened with FRP

EXPERIMENTAL STUDY ON AXIAL COMPRESSIVE BEHAVIOR OF TIMBER COLUMN LATERALLY STRENGTHENED WITH FRP

EXPERIMENTAL STUDY ON FLEXIONAL BEHAVIOR OF TIMBER BEAM STRENGTHENED WITH FRP

Experimental and Theoretical Investigation on Shear Behaviour of Small-Scale Timber Beams Strengthened with Fiber-Reinforced Polymer Composites

All FRP and FRP-concrete hybrid components for bridges: Experiments, theories and case study

FRP IN CIVIL ENGINEERING IN CHINA: RESEARCH AND APPLICATIONS

Strengthening Timber Structural Members with CFRP and GFRP: A State-of-the-Art Review

The ways and mechanisms of using CFRP materials to strengthen the flexural performance of reinforced concrete beams

Experimental study and analysis of RC beams shear strengthened with FRP/SMA composites

FRP Application and Structural Engineering Innovation of High Performance Materials Based on Mechanical Analysis

Research And Application Of Innovative Fiber Composite Structures

Experimental study on exterior filament-wound strengthening fiber-reinforced polymer bridge decks

MECHANICAL PROBLEMS ON FRP LAMINATE APPLIED IN CIVIL AND CONSTRUCTION REPAIRING AND STRENGTHENING ENGINEERING

Composite Fiber Wrapping Techniques for Enhanced Concrete Mechanics

Calculation of Bending Capacity of Wood Beam Reinforced with FRP

Flax, Basalt, E-Glass FRP and Their Hybrid FRP Strengthened Wood Beams: An Experimental Study

FRP-Wood-Concrete Composite Bridge Girders