Abstract:Branched fluorine/adamantane PBO precursor (preFABPBO), synthesized via random co-condensation between 2,2-bis(3-amino4-hydroxyphenyl)hexafluoro propane, 1,3-adamantanedicarbonyl dichloride, and trimesoyl chloride, is performed as interfacial compatibilizer, bisphenol A dicyanate ester (BADCy) resin as polymer matrix, and poly(p-phenylene-2,6-benzobisoxazole) (PBO) fibers as reinforcements to prepare PBO fibers/FABPBO-BADCy wave-transparent laminated composites by high temperature molding. The mechanical properties, wave-transparent performances, and heat resistances of PBO fibers/BADCy composites are simultaneously improved by the addition of preFABPBO. The interlaminar shear strength (ILSS) and flexural strength of PBO fibers/FABPBO-BADCy composites are 48.9 and 665.3 MPa, respectively, increased by 33.2% and 13.3% compared to those of PBO fibers/BADCy composites (36.7 and 587.4 MPa). The dielectric constant and dielectric loss values at 10(6) Hz are 2.53 and 0.003, respectively, lower than those of PBO fibers/BADCy composites (3.06 and 0.006), and the corresponding wave transmission efficiency is 94.8%, which also presents excellent stability over the wide temperature (25-200 degrees C) and frequency range (10(3)-10(7) Hz and 8.2-12.4 GHz). Meanwhile, the heat resistance index and glass transition temperature are 229.9 degrees C and 247.5 degrees C, also better than those of PBO fibers/BADCy composites (229.6 degrees C and 247.1 degrees C).

DESIGN OF EPOXY RESIN MATRIX USED FOR MODIFIED PBO FIBER COMPOSITES AND STUDY OF PROPERTIES

Study on Properties of Modified Bamboo Fiber Reinforced Polypropylene Composites

Carbon Nanotubes Grafting Pbo Fiber: A Study on the Interfacial Properties of Epoxy Composites

Branched Fluorine/Adamantane Interfacial Compatibilizer for PBO Fibers/Cyanate Ester Wave-Transparent Laminated Composites

Experimental Study of Basic Properties of PBO Organic Fibe r

Improvement of Interfacial Property Between PBO Fibers and Epoxy Resin by Surface Grafting of Polyhedral Oligomeric Silsesquioxanes (POSS)

Interface Properties of Composites from PBO Fibers Modified by Polyurethane Sizing Agent

Improvement of the interfacial shear strength of poly(p‐phenylene benzobisoxazole) fiber/epoxy resin composite via a novel surface coating agent

Grafting of Silane and Graphene Oxide Onto PBO Fibers: Multifunctional Interphase for Fiber/polymer Matrix Composites with Simultaneously Improved Interfacial and Atomic Oxygen Resistant Properties

Enhancing interfacial adhesion and mechanical performance of PBO fibers composites through mussel‐inspired molecular regulation of interphase structure

Study of Manufacture Processing Parameter of High-Performance PBO Fiber Composite

Preliminary Application of the Advanced PBO Fiber Wound Composite

Effect of Surface Modification on Mechanical and Tribological Performance of Poly-p-phenylenebenzobisoxazole Fiber-Reinforced Polyimide Composite

Surface modification of PBO fiber through oxygen plasma induced vapor phase grafting of acrylic acid

Effects of Processing Factors on the Mechanical Properties of PBO Filament/ Epoxy Composite Materials

Enhancing Interfacial Adhesion and Mechanical Performance Ofpbofibers Composites Through Mussel‐inspired Molecular Regulation of Interphase Structure

Surface modification of PBO fibers by direct fluorination and corresponding chemical reaction mechanism

POSS-bound ZnO Nanowires As Interphase for Enhancing Interfacial Strength and Hydrothermal Aging Resistance of PBO Fiber/epoxy Resin Composites

Boosting interfacial adhesion in PBO fiber/epoxy composite by employing finely granular-structured polyaniline as an interfacial intensifier

Plasma Grafting Modification on PBO Fiber Surface

Interfacial Microstructure and Properties of Poly (phenylene Benzobisoxazole) Fiber Grafted with Graphene Oxide Via Solvothermal Method