Abstract:A novel hydrogenated nitrile rubber (HNBR) composite filled with organically modified Al2O3 nanoparticle was fabricated. The effects of the nano‐Al2O3 with different particle sizes on the curing, mechanical, and tribological properties of the HNBR composites were studied. The results indicate the curing, mechanical, and tribological properties of the HNBR composites were improved for the addition of nano‐Al2O3, and the smaller nano‐Al2O3 size was, the more obvious the effect was. The HNBR composite filled with 10 nm nano‐Al2O3 had the better mechanical properties and anti‐wear performance due to that the 10 nm nano‐Al2O3 could form denser cross‐linked network. A novel hydrogenated nitrile butadiene rubber (HNBR) composite filled with organically modified Al2O3 nanoparticle was fabricated. The effects of nanoparticle Al2O3 (nano‐Al2O3) with different particle sizes on the curing, mechanical, and tribological properties of the HNBR composites were studied. Nano‐Al2O3 with different particle sizes (i.e. 10, 50, 100, and 200 nm) was filled into the HNBR in this work. Attenuated total reflection Fourier transform infrared (ATR‐FTIR) spectroscopy was used to investigate the degree of grafting between modified nano‐Al2O3 and rubber matrix. Universal material testing machine was used to study the mechanical properties of the HNBR composites. The tribological properties of the HNBR composites were tested by a ballon‐on‐disk tribometer. The wear morphology of the HNBR composite surface was examined by scanning electron microscopy (SEM). The test results reveal that the nano‐Al2O3 as filler of HNBR composite promoted the vulcanization process, improved tensile and compressive strength, and increased hysteresis energy density and the damping coefficient. And the mechanical properties of the HNBR composite improved gradually with the decrease of nano‐Al2O3 particle size. The friction and wear test results show that the addition of nano‐Al2O3 greatly reduced the dry friction coefficient and specific wear rate of HNBR composites, and the friction coefficient and wear rate decreased gradually with the decrease of nano‐Al2O3 size. The HNBR composite filled with 10 nm nano‐Al2O3 had the better mechanical properties and anti‐wear performance due to that the 10 nm nano‐Al2O3 could form denser cross‐linked network.

Preparation and properties of nitrile rubber/exfoliated hydrotalcite nanocomposites

The preparation of an elastomer/silicate layer nanocompound with an exfoliated structure and a strong ionic interfacial interaction by utilizing an elastomer latex containing pyridine groups.

Preparation and Characterization of High-Performance Natural Rubber Latex Composites with Sodium Methylene Bis-naphthalene Sulfonate Modified Multiwalled Carbon Nanotubes

Mechanical, thermal, and barrier properties of NBR/organosilicate nanocomposites

Bioinspired design of nitrile-butadiene rubber/montmorillonite nanocomposites with hydrogen bond interactions leading to highly effective reinforcement

Comparison of morphology and mechanical properties of peroxide-cured acrylonitrile butadiene rubber/LDH composites prepared from different organically modified LDHs

Effect of triethylene glycol bis(3‐tert‐butyl‐4‐hydroxy‐5‐methylphenyl)propionate on structure and mechanical properties of nitrile butadiene rubber/clay nanocomposites

Effect of ionic liquid modified carbon nanotubes on the properties of nitrile butadiene rubber and nitrile butadiene latex nanocomposites

A molecular dynamics study on the mechanical and tribological behaviors of nitrile butadiene rubber composites reinforced by boron nitride nanotubes

Novel Preparation and Properties of EPDM/montmorillonite Nanocomposites

A Facile and Environmentally Friendly Approach to Fabricate Hybrid Crosslinked Nitrile Butadiene Rubber with Comprehensively Improved Mechanical Performances by Incorporating Sacrificial Ionic Bonds

PREPARATION AND PROPERTIES OF CARBON NANOTUBES/NATURAL RUBBER COMPOSITES

New Fabrication and Mechanical Properties of Styrene-Butadiene Rubber/Carbon Nanotubes Nanocomposite

Preparation and characterization of Si3N4/SBR nanocomposites with high performance

Preparation and characteristics of nitrile rubber (NBR) nanocomposites based on organophilic layered clay

Preparation and Properties of Nanocomposites Based on Different Polarities of Nitrile–butadiene Rubber with Clay

Curing, mechanical, and tribological properties of hydrogenated nitrile butadiene rubber reinforced with Al2O3 nanoparticles

Preparation and properties of new EPDM/vermiculite nanocomposites

Curing kinetics and mechanical behavior of natural rubber reinforced with pretreated carbon nanotubes

Rheological and Mechanical Properties of Silica/Nitrile Butadiene Rubber Vulcanizates with Eco-Friendly Ionic Liquid

Preparation and mechanical properties of water‐dispersible hyperbranched polymer grafted carbon black/natural rubber composites by latex blending method