Abstract:C/C–SiC composites with four different preform structures were prepared via chemical vapor infiltration and reactive melt infiltration (RMI). The effects of preform structure on the microstructure and mechanical properties of the C/C–SiC composites were thoroughly investigated. The results indicate that the porous C/C composites with multidirectional long/short fiber‐coupling exhibited consistent pore size distribution (diameter: 5–300 μm) and periodicity pore distribution characteristics. As the effective fiber volume fraction in the loading direction of the C/C–SiC composites increased from 11.71% to 21.04%, the tensile and flexural strength significantly increased by 64.44% and 44.03%, respectively, with minimal effect on compressive and interlaminar shear properties. The introduction of Z‐direction fiber, such as stitched structure, increased the compressive and interlaminar shear strength of the composites by 10.87% and 15.67%, respectively. A theoretical predictive model of ultimate tensile strength after modification was validated for application to the C/C–SiC composites prepared by RMI, through characterization of the volume fraction of each layered unit and the content of each component. However, the presence of defects caused by the stitched structure, such as fiber bending, occupancy, and pores, reduced tensile and flexural strength by 30.45% and 28.56%, thereby impacting the effectiveness of the predictive model negatively.

Processing and Mechanical Properties of Short Carbon Fiber Reinforced SiC Matrix Composites

Experiment study of dispersion uniformity of short carbon fiber reinforced silicon carbide

Research of dispersion uniformity of carbon fiber in short carbon fiber reinforced silicon carbide composites

Study on the Mechanical Property of High‐Performance Silicon Carbide Fiber

Fabrication and microstructure evolution of Csf/ZrB2-SiC composites via direct ink writing and reactive melt infiltration

Effect of Carbon Particle and Carbon Fiber on the Microstructure and Mechanical Properties of Short Fiber Reinforced Reaction Bonded Silicon Carbide Composite

Mechanical Properties And Toughening Mechanisms Of Several Kinds Of Sio2 Matrix Composites

Microstructure and Mechanical Properties of SiC F /sibcn Ceramic Matrix Composites

Processing, microstructure, and mechanical properties of chopped SiC fibers reinforced ZrB2–hBN–based composites

Mechanical Property and Microstructure of SiC Platelets (SiCpl) Reinforced BAS Matrix Composites

Effects of preform structure on microstructure and mechanical properties of long/short fiber‐coupled C/C–SiC composites

Microstructure and mechanical properties of SiC f /SiC composite prepared by chemical vapor infiltration

Microstructures and Interface of C2/SiC Composites

Improved Mechanical Properties of Csf/SiC Composite by Rapid Hot Press Sintering

Effects of Carbon Fiber Architecture on the Microstructure and Mechanical Property of C/C-SiC Composites

Analysis of the Mechanical Properties in Short Carbon Fiber-toughened ZrB2—SiC Ultra-high Temperature Ceramic

Fabrication and characterization of random chopped fiber reinforced reaction bonded silicon carbide composite

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Short SiC Fiber Reinforced SiC-BN Ceramic Matrix Composites

Microstructure and mechanical properties of short-carbon-fiber/Ti3SiC2 composites

SiC Fiber Reinforced Geopolymer Composites, Part 1: Short SiC Fiber