Abstract:Effect of varying surface structures of the inner rotating cylinder on characteristics of droplet formed in a liquid-liquid Taylor-Couette (TC) reactor is investigated. Two novel surface structures of inner cylinders, designed with axially corrugated surface (N40) and with typical three-dimensional roughness (NZ40), respectively, were adopted for the investigation. The high-speed camera visualization was used to measure the droplet size while CFD modelling was applied to predict the fluid dynamics of TC flows with such two inner cylinders and a smooth surface inner cylinder, thus revealing the effect of inner cylinder configuration on the droplet formation in the TC flows. The experimental results have clearly indicated that both the rotation speed and surface configuration variation of the inner cylinders affect the generated droplet size and distribution. As the rotation speed increases, the droplet size is obviously reduced for all types of inner cylinder configurations. Compared with the conventional smooth surface inner cylinder, the two new types of inner cylinders with special surface structures can produce much smaller droplets, especially for the case of N40 surface structure inner cylinder, with which the smallest droplet size was found at all the experimental conditions. CFD modelling results have demonstrated that the surface configurations of inner cylinder can significantly affect the turbulence generation, consequently altering the distributions of turbulent kinetic energy and local turbulence shear strain rate. As a result, the droplet size was found to be controlled by the change of the local turbulent dissipation rate that was strongly associated with the surface structures of inner cylinders. Empirical correlations that correlate the droplet size with the Weber number and Reynolds number were proposed based on the high-speed camera visualization data.(c) 2022 The Authors. Published by Elsevier Ltd. This is an open access article under the CC BY license (http:// creativecommons.org/licenses/by/4.0/).

CFD Simulation of Immiscible Liquid-Liquid Dispersion in a Stirred Tank

Computational Fluid Dynamics Simulation of Bubble Size and Local Gas Holdup in Stirred Vessel

Study on Local Gas-Liquid Dispersion in Dual-Impeller Aerated Stirred Vessel

CFD-PBM Investigation on Droplet Size Distribution in a Liquid–Liquid Stirred Tank: Effect of Impeller Type

CFD Prediction of the Critical Agitation Speed for Complete Dispersion in Liquid‐Liquid Stirred Reactors

Effect of Inner Cylinder Configuration on Liquid Droplet Dispersion and Size Distributions in a Taylor-Couette Reactor

Study on the Numerical Model of Gas-Liquid Dispersion Driven by a Coaxial Mixer

Experimental Investigation on Solid Particle Distribution in Dense Solid–liquid Stirred Tank

CFD simulation on shear-thinning gas-liquid dispersion in coaxial mixer

A Study on Liquid‐liquid Dispersions in a Continuous Mixer Via Computational Fluid Dynamics (CFD) Simulation Combined with Population Balance Model (PBM)

Numerical Simulation of Dense Solid-Liquid Mixing in Stirred Vessel with Improved Dual Axial Impeller

CFD Simulation of the Mixing and Dispersing of Floating Particles in a Viscous System

Numerical Simulation of Gas-Liquid Dispersion in A Stirred Tank Agitated by Punched Rigid-Flexible Impeller

0D Homogeneous Simulation of Droplet Size Evolution in a Turbulent Stirred Tank

An Experimental Study of Immiscible Liquid–liquid Dispersions in a Pump–mixer of Mixer–settler

CFD modeling of hydrodynamic characteristics of a gas-liquid two-phase stirred tank

Simulation of Solid Suspension in a Stirred Tank Using CFD-DEM Coupled Approach

Progress on CFD simulation of gas-liquid two-phase flow in stirred tank reactor

NUMERICAL SIMULATION OF LAMINAR SOLID-LIQUID TWO-PHASE FLOW IN STIRRED TANKS

Research progress of gas dispersion in stirred vessel with medium or high viscosity fluids

CFD–PBM Simulation on Bubble Size Distribution in a Gas–Liquid–Solid Flow Three-Phase Flow Stirred Tank