Abstract:With the rapid pace of socioeconomic progress, there has been a continuous rise in the generation of municipal solid waste incineration (MSWI) fly ash. Enhancing the efficiency of MSWI fly ash utilization, minimizing expenses, and developing more cost-effective and environmentally sustainable cementitious materials represent critical scientific challenges that warrant immediate attention. The research commenced with the preliminary treatment of MSWI fly ash using a blend of chemical activators and a water rinsing method. Following this, quicklime and coal fly ash were incorporated to formulate a geopolymer derived from MSWI, aimed at stabilizing the MSWI fly ash. Throughout this investigation, a selection of five chemical activators—calcium hydroxide, sodium hydroxide, sodium silicate, dilute sulfuric acid, and citric acid—was employed in conjunction with a water-washing procedure to condition the MSWI fly ash. Three single factor experiments denoted A, B, and C, were designed, and the corresponding geopolymer samples were prepared. In this research, the analysis focused on the solidified MSWI fly ash-based geopolymer samples, examining their physical and chemical characteristics, compressive strength, levels of heavy metal release, and the structure at a microscopic level. The findings revealed that the B3 series exhibited the most substantial 28-day compressive strength, reaching 1.692 MPa. Concurrently, the concentrations of leached heavy metals, including zinc (Zn), copper (Cu), chromium (Cr), lead (Pb), cadmium (Cd), and nickel (Ni), were all beneath the regulatory thresholds stipulated by the GB16889 and GB18598 criteria, signifying a notably effective solidification outcome. During the geopolymerization process, gel phases such as calcium aluminosilicate hydrate (C-A-S-H) and calcium silicate hydrate (C-S-H) are formed within the geopolymer matrix. This leads to the formation of a compact and cohesive cementitious material, which showcases superior mechanical strength and a robust capacity for heavy metal sequestration. This research contributes to the safe management of MSWI fly ash by not only facilitating its non-hazardous disposal but also enabling the efficient containment and elimination of heavy metals, chloride ions, and elemental aluminum.

Study on Solidification of Cr3+ by Metakaolin-Fly Ash Based Geopolymer

Hydrothermal Processing, Characterization and Leaching Toxicity of Cr-added “fly Ash-Metakaolin” Based Geopolymer

Study on the Geopolymer Based on Fly Ash and Slag

Early solidification/stabilization mechanism of heavy metals (Pb, Cr and Zn) in Shell coal gasification fly ash based geopolymer

Solidification and Immobilization of MSWI Fly Ash Through Aluminate Geopolymerization: Based on Partial Charge Model Analysis.

The Influence of Particle Size and Calcium Content on Performance Characteristics of Metakaolin- and Fly-Ash-Based Geopolymer Gels

Strength and microstructure of class C fly ash based geopolymer activated with sodium silicate powder

The effects of alkaline dosage and Si/Al ratio on the immobilization of heavy metals in municipal solid waste incineration fly ash-based geopolymer.

Study on Fabrication and Microstructures of Fly Ash Based Geopolymeric Cements

Mechanism of Polymerization During the Solidification of Flyash-based Geopolymers

Performances and microstructure of one-part fly ash geopolymer activated by calcium carbide slag and sodium metasilicate powder

Preparation and properties of geopolymer containing phosphoric acid-activated fly ash and mechanically-milled kaolinite: Experiments and density function theory

Performance deterioration of municipal solid waste incineration fly ash-based geopolymer under sulfuric acid attack

Effect of Municipal Solid Waste Incineration Fly Ash on the Mechanical Properties and Microstructure of Geopolymer Concrete

Comparison Between Geopolymer Reaction and Cement Hydration in Solidification of Fly Ash Generated in Municipal Solid Waste Incineration

Utilization of Calcium Carbide Residue as Solid Alkali for Preparing Fly Ash-Based Geopolymers: Dependence of Compressive Strength and Microstructure on Calcium Carbide Residue, Water Content and Curing Temperature

A high-strength red mud–fly ash geopolymer and the implications of curing temperature

Microstructural and Mechanical Characterization of Fly Ash Cenosphere/metakaolin-Based Geopolymeric Composites

Enhanced geopolymerization of MSWI fly ash through combined activator pretreatment: A sustainable approach to heavy metal encapsulation and resource recovery

Synthesis of metakaolin-based geopolymer foamed materials using municipal solid waste incineration fly ash as a foaming agent

Preparation of functional geopolymers from municipal solid waste incineration fly ash: An approach combining experimental and computational simulation studies