Abstract:Little detailed information is available on the microwave drying characteristics of potato and the use of different microwave powers to dry food products. Experiments were conducted to study the microwave drying characteristics and the dried quality of potato. The study focuses on describing the microwave drying characteristics of potato and discussing the effect of sample thickness, drying power and mass. The results show that if the power level increases, the mass load decreases and the thickness of the sample decreases, the dehydration rate increases and the drying energy consumption decreases. There are two falling rate periods during microwave drying of potato: the first falling rate period is for a moisture content of more then 1.1 (dry basis, DB); the second falling rate period is for a moisture content of less than 1.1 (DB). The same water loss will consume more energy when the moisture content is less than 1.1 (DB). A two-stage drying process was employed during microwave drying of potato. The microwave power of the first drying stage differed form that of the second drying stage. The moisture content of the breakpoint for the conversion of the first drying stage into the second drying stage is a moisture content of 1.1 (DB). A quadratic orthogonal regression experiment was conducted, and the effects of slice thickness, the first drying load power and the second drying load power on sensory quality, the rehydration ratio and the energy consumption rate were established. The slice thickness, the first drying load power and the second drying load power linearly affected the three indices. The effect of the product of the second drying load power and the potato slice thickness on the rehydration ratio and the energy consumption rate is significant. The optimum drying parameter combination for the three indices was obtained. The rehydration ratio of the dried products decreased with an increase of the second drying load power and the slice thickness. The concave curves of the sensory quality versus the three factors were shown.

Model of the Component Degradation about Foam-Drying the Papaya Bubble by Microwave

Microwave Vacuum Drying Properties and Kinetics Model of Radix Paeoniae Rubra Extract

Characteristics and Model of Microwave Drying Sweet Potato

RSM As an Approach to Optimize Ginger Intermittent Microwave Drying Process

The Drying Characteristics and Technology of Potato Slices by Microwave

Modeling Simultaneous Heat and Mass Transfer for Microwave Drying on Apple

Thermal modelling of microwave dehydration of fruit slice

Studies on the Microwave Drying Characteristics and Mathematical Model of Water-oat

Investigating the Impact of Microwave Drying on Papaya Slice Quality and Drying Attributes

Optimization of microwave heating on orange sacs products

Moisture diffusion modelling and effect of microwave vacuum drying on drying kinetics and quality of yam

Simulation of temperature during vacuum microwave drying of mixed potato and apple slices

Microwave Drying Characteristics of Potato and the Effect of Different Microwave Powers on the Dried Quality of Potato

Microwave Drying of Food and Agricultural Materials: Basics and Heat and Mass Transfer Modeling

Modeling Equilibrium Moisture Content of Γ-Ray Irradiated Rough Rice

The effect of microwave vacuum drying process on citrus: drying kinetics, physicochemical composition and antioxidant activity of dried citrus (Citrus reticulata Blanco) peel

Kinetic Model of Moisture Loss and Polyphenol Degradation during Heat Pump Drying of Soursop Fruit (Annona muricata L.)

Drying characteristics and drying quality of carrot using a two-stage microwave process

Kinetic Modeling of Convective and Microwave Drying of Potato Peels and Their Effects on Antioxidant Content and Capacity

Analysis of thermal effect using Coupled Hot-air and Microwave heating at different position of potato

Drying kinetics, powder properties, and bioactive components of bitter orange (Citrus aurantium L.) dried by microwave-assisted foam-mat approach