Abstract:This study investigates the synthesis and characterization of composite materials, pigeon pea stem, and cotton fibers blended in different ratios such as 100/0, 70/30, 60/40, 50/50, 30/70, and 0/100. These composite materials were produced using a compression molding technique. According to ASTM standards, the acoustics, thermal conductivity, and physical characteristics of the composite samples were tested to assess their qualities. The impedance tube method detailed in ASTM E1050 was used to determine the sound absorption coefficients (SAC) for acoustics. The SAC values were measured at six frequencies such as 125, 250, 500, 1000, 2000, and 4000 Hz. The results showed that composite samples made from waste cotton and pigeon pea demonstrated sound absorption values of greater than 80%. Superior sound insulation and absorption, moisture absorption, fiber properties have also been demonstrated by waste composites. Especially, the waste cotton/pea stalk waste fiber composites achieved over 75% sound absorption, while the waste 28% composites performed well in terms of sound absorption, moisture absorption, and fiber properties. Even in humid conditions, the composite samples constructed from used cotton and pigeon pea stalks demonstrated good moisture resistance without reducing their insulating qualities. Soundproofing barriers are composite layers of foam or pigeon pea/cotton. 本研究研究了以 100/0、70/30、60/40、50/50、30/70 和 0/100 等不同比例混合的复合材料、木豆茎和棉纤维的合成和表征。这些复合材料是使用压缩成型技术生产的。根据 ASTM 标准,对复合材料样品的声学、导热性和物理特性进行了测试,以评估其质量。 ASTM E1050 中详述的阻抗管方法用于确定声学吸声系数 (SAC)。 SAC值是在125、250、500、1000、2000和4000Hz等六个频率下测量的。结果表明,由废棉和木豆制成的复合材料样品的吸声值大于80%。废旧复合材料也表现出了优越的隔音吸音、吸湿、纤维特性。特别是废棉/豌豆秆废纤维复合材料的吸声率达到75%以上,而废28%复合材料在吸声、吸湿和纤维性能方面表现良好。即使在潮湿的条件下,由用过的棉花和木豆秆制成的复合材料样品也表现出良好的防潮性,而不会降低其绝缘性能。隔音屏障是泡沫或木豆/棉的复合层。

Sound Insulation Property Study on Superfine Glass Fiber Paper Composite Material

Chemical Treatment of Carbon Fibers and the Development of Functional Paper

Research on Surface Treatment of Carbon Fiber and the Conductive Properties of Paper

Acoustic Properties of Glued Laminated Bamboo and Spruce-Pine-fir

Extrusion Foaming Of Lightweight Polystyrene Composite Foams With Controllable Cellular Structure For Sound Absorption Application

Enhanced Sound Insulation and Mechanical Properties Based on Inorganic Fillers/thermoplastic Elastomer Composites

Preparation and Properties of Damping Materials in Multi-Phase System

Mechanic and Acoustic Properties of the Sound-Absorbing Material Made from Natural Fiber and Polyester

Preparation and property evaluation of sound-absorbing/thermal-insulating PU composite boards with cushion protection

Preparation and sound insulation of honeycomb composite structures filled with glass fiber

Enhancing sound insulation of glass interlayer films by introducing piezoelectric fibers

Utilizing Waste Cotton/Pigeon Pea Stalk Fibers Composites for Enhanced Sound Absorption and Insulation in Automotive Interiors

Research on the Sound Insulation Performance of Composite Rubber Reinforced with Hollow Glass Microsphere Based on Acoustic Finite Element Simulation

Strength and thermal insulation properties of foam-formed ceramic fiber paper with different reinforcement methods

The influence of rosin, blowing agent, and mould type on the sound insulation of paper-based foams

Simulation, measurement and optimization of sound absorption in gradient impedance fiber-based composites

Acoustic properties of glubam and SPF

Comprehensive noise reduction performance of polyurethane/ferroferric oxide/activated carbon fiber felt coated flexible composites

Effect of physiochemical structure on energy absorption properties of plant fibers reinforced composites: Dielectric, thermal insulation, and sound absorption properties

Application of Cellulose and Paper-Based Products in Building Acoustics

Preparation, mechanical, acoustic and thermal properties of silica composite aerogel using wet-laid glass fiber felt as scaffold