Abstract:Structural Health Monitoring, Ahead of Print. This study proposes a long-term health monitoring method for tunnel structure transformation using a 3D light detection and ranging (LiDAR) equipped in a mobile robot. The proposed method comprised two phases: 3D point cloud maps (PCMs) generation and health indicators (HIs) extraction at the same location for the long-term structure transformation inspection. First, the 3D point cloud data (PCD) and six-degree-of-freedom acceleration and gyration of a mobile robot were measured during periodic inspection of tunnel structures using the 3D LiDAR and an inertial measurement unit. This information was combined to generate a 3D PCM by utilizing tightly coupled LiDAR inertial odometry. This procedure could be repeated to inspect tunnel structure transformation at patrol inspection in a long term. 3D PCMs measured during period inspection were then registered to extract a 3D PCD at the location of the first measurement. Hence, an iterative closest point method with edge features was executed to register periodic PCD measurements. Second, 3D PCD in predefined locations were extracted at every measurement. These PCD were used to extract features that are highly correlated to the inner wall and ground of the tunnel structure to obtain five HIs representing their health conditions. These HIs were then employed to evaluate the structural health of the tunnel. Field experiments were conducted to demonstrate the effectiveness of the proposed method in buildings and tunnels. The proposed method outperformed other 3D PCM methods, especially in structures with few features such as tunnels and corridors. A systematic analysis of the experimental results also revealed that the proposed method ensures the accuracy and robustness of HIs extraction at the same location, confirming the feasibility of long-term inspection. The proposed inspection method for tunnel structures and embedded mobile robot system provides a cost-effective and autonomous solution for infrastructure health monitoring.

Whole Lifecycle Health Detection Technology and Application of Tunnel Based on 3D Point Cloud

A 3D Laser Scanning Mountain Tunnel Processing Method Based on ICP Algorithm

Research on Inspection Technology of Tunnel Disease Based on Panoramic Vision

Visual Monitoring Technology of the Tunnel 3D Laser Scanning and Engineering Applications

Technology and Application of 3D Tunnel Information Monitoring

3D Laser Scanning Acquisition and Modeling of Tunnel Engineering Point Cloud Data

3D reconstruction and automatic leakage defect quantification of metro tunnel based on SfM-Deep learning method

Deformation monitoring of noncircular tunnels based on 3D laser scanning

Tunnel Monitoring and Measuring System Using Mobile Laser Scanning: Design and Deployment

Method For Tunnel Life-Cycle Heath Monitoring Based On Distributed Optical Fiber Sensor

Automatic Crack Detection and Quantification for Tunnel Lining Surface from 3D Terrestrial LiDAR Data

Study on the 3D laser scanning technology for tunnel inspection

Overview of Tunnel Detection Technology

Study of Tunnel Surface Parameterization of 3-D Laser Point Cloud Based on Harmonic Map

Design and Test of Subway 3 D Point Cloud Data Obtained Based on Ground 3 D Laser Scanning Technology

A State-of-the-Practice Review of Three-Dimensional Laser Scanning Technology for Tunnel Distress Monitoring

Research on Tunnel Construction Monitoring Method Based on 3D Laser Scanning Technology

A Coal Mine Tunnel Deformation Detection Method Using Point Cloud Data

Long-term monitoring method for tunnel structure transformation using a 3D light detection and ranging equipped in a mobile robot

Research on convergence analysis method of metro tunnel section--Based on mobile 3D laser scanning technology

Study on structural mechanical characteristics and safety warning of NATM tunnel in aquifer