EXPERIMENTS AND SIMPLIFIED ANALYSIS FOR RC CANTILEVER SLAB STRENGTHENED WITH BONDED GFRP STRIPS

Cao Shuang yin,Teng Jin guang,Qiu Hong xing,Lin Li

DOI: https://doi.org/10.3321/j.issn:1000-131X.2001.01.008

2001-01-01

Abstract:An experimental study on ten pieces of RC cantilever slabs strengthened with bonded GFRP strips is performed in the paper. Internal steel reinforcement ratio for strengthened Slabs were 0.28%、 0.5% or 0.79% while their external GFRP reinforcement ratios were 0.20% 、0.41% or 0.82% .The GFRP strips were made of one or two layers. The relationships of load versus deformation or strain are measured. Two failure modes are observed in the test: GFRP tensile rupture and debonding.Regardless of failure modes, the bearing capacity of all strengthened slabs is greatly increased, but their ductility is obviously reduced. Local debonding procession is occurred before the peak load, which improved the ductility of strengthened slabs. A numerical method used to predict the behavior of slabs is also presented. Another simplified method is given to predict the bearing capacity based on the Chinese design code for RC structures. The calculating results are matched with the test results well.