Theoretical and experimental studies on relationship between working parameters of cone drill and rock strengths

GUO Ru-kun,FENG Chun,LI Zhan-jun,QIAO Ji-yan,LI Shi-hai

DOI: https://doi.org/10.11779/CJGE201607008

2016-01-01

Abstract:The relationship between operating parameters ofcone drill (drilling speed, drill pipe axial force, rotational speed) and rock mass strengths (cohesion, internal friction angle)is established by meansoftheoretical analysis and field tests based on the single-tooth impact and pressure rock fragmentation mechanisms. The geometrical morphology of broken area by single-toothis obtained, and the relationship among single-tooth rock fragmentation volume, drill pipe axial force, cohesion and internal friction angle is established based on the Boussinesq elasticity solution and D-P plasticcriterion in theoretical analysis. The relationship among single-tooth rock fragmentation volume, drilling speed and rotational speed established by the relationship that the accumulation of single-tooth rock-breaking volume and the macro rock volume is equal when the drill pipe rotates a circle. The results of theoretical analysis show that the fractured area basically exbibits ellipsoid and a thin layer in the surface layer under the single-tooth pressure. The relationship between drilling speed and rotational speed islinear, thatbetween drilling speed and drill pipe axial force is 3/2 power, and thatbetween drilling speed and cohesion is-3/2 power.The influence of internal frictionangle on the penetration rate can be ignored. Fieldtests on the drilling lawof conedrill are conducted inthesouth mining area of AnqianMine, and the relationship among drilling speed, drill pipe axial force, rotational speed and cohesion is obtained. The theoretical analysis and the actual measurements coincide fairly well. The research achievementsmay provideabasis for the optimization designof working parameter of conedrill and dynamic tests onrock mass strengths.