Abstract:In the past few years, fiber optic sensing technologies have played an increasingly important role in the health monitoring of civil infrastructures. These innovative sensing technologies have recently been successfully applied to the performance monitoring of a series of geotechnical structures. Fiber optic sensors have shown many unique advantages in comparison with conventional sensors, including immunity to electrical noise, higher precision and improved durability and embedding capabilities; fiber optic sensors are also smaller in size and lighter in weight. In order to explore the mechanism of seepage-induced slope instability, a small-scale 1 g model test of the soil slope has been performed in the laboratory. During the model's construction, specially fabricated sensing fibers containing nine fiber Bragg grating (FBG) strain sensors connected in a series were horizontally and vertically embedded into the soil mass. The surcharge load was applied on the slope crest, and the groundwater level inside of the slope was subsequently varied using two water chambers installed besides the slope model. The fiber optic sensing data of the vertical and horizontal strains within the slope model were automatically recorded by an FBG interrogator and a computer during the test. The test results are presented and interpreted in detail. It is found that the gradually accumulated deformation of the slope model subjected to seepage can be accurately captured by the quasi-distributed FBG strain sensors. The test results also demonstrate that the slope stability is significantly affected by ground water seepage, which fits well with the results that were calculated using finite element and limit equilibrium methods. The relationship between the strain measurements and the safety factors is further analyzed, together with a discussion on the residual strains. The performance evaluation of a soil slope using fiber optic strain sensors is proved to be a potentially effective approach.

A Fiber Optic Sensing Net Applied in Slope Monitoring Based on Brillouin Scattering

Optical Fiber Sensing Structure for Slope Monitoring Based on Brillouin Optical Time Domain Reflectometer

APPLICATION OF OPTICAL FIBER SENSING TECHNOLOGY TO SLOPE MODEL TEST

PHYSICAL MODEL TESTING OF SLOPE STABILITY BASED ON DISTRIBUTED FIBER-OPTIC STRAIN SENSING TECHNOLOGY

Distributed Fiber Monitoring Test and Its Application to Slope Deformation

STUDY ON DISTRIBUTED OPTICAL FIBER SENSOR-BASED MONITORING FOR SLOPE ENGINEERING

Slope-Assisted Brillouin-Based Distributed Fiber-Optic Sensing Techniques

Distributed Fiber Optic Monitoring and Stability Analysis of a Model Slope under Surcharge Loading

High-density distributed fiber optic sensing system based on Rayleigh backscattering effect

The study on prestressed cable stress based on Brillouin-optictime optic fiber sensor

Laboratory studies on slope stability monitoring using distributed fiber-optic sensing technologies

Fiber optic based monitoring technologies of slope engineering

MODEL TEST OF SOIL SLOPE STABILITY WITH DISTRIBUTED OPTICAL FIBER SENSING TECHNOLOGY

Research on Long Distance Distributed Monitoring Network Technique Based on Brillouin Scattering

Dynamic Distributed Brillouin Optical Fiber Sensing Based on Multi-Slope Analysis

A Novel Method of Embedding Distributed Optical Fiber Sensors for Structural Health Monitoring

A Highly Integrated BOTDA/XFG Sensor on a Single Fiber for Simultaneous Multi-Parameter Monitoring of Slopes

Fiber Bragg Grating-Based Performance Monitoring of A Slope Model Subjected to Seepage

Distributive monitoring of the slope engineering

A Study On Botdr-Based Distributed Monitoring For Slope Engineering

Application of fully distributed strain sensing technology in a slope model test