Experimental study on shear mechanism at pile-soil interface of jacked open-ended prestressed high-strength concrete pipe piles

KOU Hailei,YU Feng,ZHANG Mingyi
DOI: https://doi.org/10.14006/j.jzjgxb.2017.05.021
2017-01-01
Abstract:The shear mechanism of pile-soil interface of open-ended prestressed high-strength concrete (PHC) pipe piles plays an important role during installation and static loading test.The full-scale tests were conducted on one test pile inserted with FBG sensors jacked into stratified soils.The shear mechanism of pile-soil interface of open-ended pipe piles during installation and static loading test were studied respectively.The results indicate that the axial force and shaft resistance gradually transfer along the depth during installation,and the magnitude is closely related to soil properties around pile.The transfer efficiency of axial force is 98.2 %,92.2%,96.3%,83.8%,80.5%,respectively.The shaft resistance at the same depth gradually decreases with the increase of jacking cycles.After five jacking cycles,the shaft resislances of sand silt at 6 m depth decrease about 46.25% and the value of silty clay at 10 m depth decreases about 12.1% after three jacking cycles.During the static loading test,the shaft resistance between pile and soil gradually mobilizes from up to down.To fully mobilize the shaft resistance,the relative displacement between pile and soil in silty clay is the maximum and about 6.96-7.46 mm,the value in silt clay layer is second and aboul 6.05 rmm,the minimum value with 4.23 mm appears in sandy silt.Compared with in-suit soils,the water content and void ratio of soils in remold zone decease.The parameters of unit weight,cohesion and internal friction angle increase.The variation of soil parameters in remold zone is the most important reason to cause the difference of shear mechanism at pile-soil interface during installation and static loading test.
What problem does this paper attempt to address?