Abstract:In the process of air filtration, filter materials may encounter oil-solid mixed particles from various sources such as industry and household, and the influence of filter material with different wettability on the filtration performance of oil-solid mixed particles has not been fully reported. The objective of this study was to prepare filter materials with varying wettability properties and investigate their filtration performance for oil-solid mixed particles with diverse oil contents. In this study, four filter materials were prepared using the impregnation method, exhibiting 0° (superoleophilic), 46° (oleophilic), 90° and 122° (oleophobic) oil contact angles. The oil-solid mixed particles with varying oil contents were loaded on the four different filter materials. The loading behavior of the filter materials was characterized from two aspects: macroscopic loading behavior (changes in pressure drop and DHC) and microscopic particle deposition behavior. The results demonstrated that, under the conditions of 25% and 50% oil content, the enhanced liquid bridge force between the oil-solid mixed particles on the oleophobic filter material facilitated the formation of a loose and porous cake layer structure compared with other filter materials, resulting in a lower growth rate of pressure drop and a higher dust holding capacity (DHC). However, in 75% and 100% oil content environments, the superoleophilic filter material owned a remarkably high affinity for oil particles compared with other filter materials, leading to the gradual formation of an oil film structure on the filter material, yielding lower the growth rate of pressure drop and higher DHC. These findings shed light on the mechanism of particle deposition under diverse filtration conditions and are applicable to the filtration of various oil-solid mixed particles over a wide range of oil contents.

Improvement of Oil-Prllf Capability of Fier Ball Filtration Meduum by Oil Field Wastewater

A FACILE WAY TO PREPARE A SPONGE/CELLULOSE FIBER COMPOSITE AND ITS APPLICATION IN OIL/WATER SEPARATION

Effective and low fouling oil/water separation by a novel hollow fiber membrane with both hydrophilic and oleophobic surface properties

Treatment of ASP produced water with hydrophilic fibre ball filtration

Deep‐bed Filtration with Fiberball Medium

Turning Tissue Waste into High-Performance Microfiber Filters for Oily Wastewater Treatment.

Research on the fouling and cleaning of micro-filtration membrane in oilfield wastewater

Long-Lasting Filtration of Oily Water by Anti-Fouling Underwater Oleophobic Sand Particles

PSU-g-SBMA Hollow Fiber Membrane for Treatment of Oily Wastewater.

RESEARCH ON HYDRAULIC SELF-CLEANING FIBER FILTRATION

Improvement in microfiltration process of oily wastewater: A comprehensive review over two decades

Study on Method of Cleaning Membrane in Treatment of Oil Field Waste Water by UF Process

Recent progress on fabrication technology of functional membranes for oil/water separation

Washing performance of microbubbles on porous media

An expanding horizon: Recyclable dual-functional size-adjusted fluorinated mesh devices for large-scale oily wastewater remediation

An investigation of the filtration performance and mechanism of oil-solid mixed particles on filter materials with different wettability

Development Trend: Rotary fibre disk filtration in the treatment of oilfield wastewater

Oily wastewater treatment and reuse technology in low permeability oilfield

Pilot-plant of Oily Wastewater Treatment for Reinjection of Low Permeability Oilfield

Study of the environmental management schema for mixed residential areas near extra-low-permeability oilfield based on PVC-blend hollow-fiber membrane wastewater treatment

Application of UF Membrane Technology to Reuse of Oil Field Wastewater