Abstract:The flow of dual radial ventilation system without fan for a hydro-generator was simulated with parallel computing CFD code. The multiple implicit rotating frame (MRF) method and porous media model were used, averaged 3D Navier-Stokes (N-S) equations and RNG k-ε equations were solved. The flow characteristic of different parts was analyzed. In order to get accurate heat transfer coefficients of the wall for thermal stress analysis with finite element method, the heights of the fist meshes near the wall were controlled strictly and the values of y+ were controlled between 30 and 100. Because the flow flux to cool the end of stator bars is small, the style of cover of pole (static or rotating) and the leakage gaps between poles and stators will impact the cooling of stator bars. The rotating cover with leakage gaps is the best style for the cooling of stator bars. The flow from leakage gaps between poles and stators forms "air wall" with rotating velocity, which generates a recirculating zone between internal stator bars and induces the air from cooler into the zone, the heat transfer coefficient of internal stator bars is higher than the one of external stator bars. The heat transfer coefficient of internal stator bars is reduced after removing the leakage gaps. Due to rotational effects of the poles, the main ventilation loss is generated at the entrance of stator ventilation slots, the windward and leeward zones are formed around stator bars and recirculating zones are easy to be formed in leeward zones. The heat transfer coefficient in windward zones is higher than the one in leeward zones. The research is helpful for the optimization of the ventilation system design.

Numerical simulation on ventilation scheme in a turbine building of advanced nuclear power plant

The Numerical Analysis Of Ventilation And Temperature Fields For A Bulb Tubular Turbine Generator

Numerical simulation and optimization on local mechanical ventilation in steam turbine room of thermal power plant

Numerical study of flow and heat transfer on construction machinery detached vehicular cooling system

Numerical Simulation of Thermal Pressure Ventilation in Building Atrial: A Case Study

Thermal Buoyancy Driven Flows Inside the Industrial Buildings Primarily Ventilated by the Mechanical Fans: Local Facilitation and Infiltration

Numerical simulation of heat transfer performance of an air-cooled steam condenser in a thermal power plant

Numerical Simulation of Ventilation System for IC Engine Laboratory

Numerical simulation, PIV measurements and analysis of air movement influenced by nozzle jets and heat sources in underground generator hall

Numerical analysis of validity of ventilation in heat workshop

Numerical Simulation of Self-balanced Warm-Air Heating in Boiler-Room of Thermal Power Plant in Winter

Numerical simulation on ventilation system of hydro-generator

Numerical Simulation on a Thermal Management System for a Small Data Center

Numerical Simulation and Optimisation Design for Ventilation and Heat Dissipation in High-Temperature and High-Load Indoor Substations

Numerical simulation on conjugate heat transfer of turbine cascade

CFD Simulation on a Thermal Power Plant with Air‐cooled Heat Exchanger System in North China

Three-dimensional Numerical Study on Thermal Performance of a Super Large Natural Draft Cooling Tower of 220m Height

Numerical Simulation of the Axial Fan of the Turbogenerator

Numerical simulation for optimising of inlet and outlet positions for mechanical ventilation and heat dissipation: A case study to improve ventilation in an indoor 110kV substation

Numerical Investigation of Influence on Heat Transfer Performance of Direct Air Cooled Condenser under Different Wind Directions.

The Numerical Simulation for Air Distribution of an Underground Main Workshop in Hydropower Station