Abstract:PurposeThis study deals with three major topics: (1) the developed generations of 3D concrete printers, (2) the mix design approach for cement-based materials and (3) laboratory testing.Design/methodology/approachThe big question is how to approach and follow the trend of 3D concrete printing technology with limited conditions such as printers, technology issues and budget. Therefore, this research focused on dealing with prominent issues, including printing equipment, mixed proportion design approaches and laboratory testing methods will be presented and analyzed.FindingsThe details of three printing equipment, including a printhead, a small-scale 3D printer, a 3D concrete printer and the printing process related to Simplify and Mach3 software, will be revealed. Secondly, the classification and efficient process will be given according to the mixture proportion design method proposed. Thirdly, laboratory testing will be conducted, including extrudability, buildability and printability. Finally, some highlight conclusions are given based on the appearance and quality of the samples printed.Research limitations/implicationsResearch has been carried out with cement-based materials and 3D concrete printer which adopted the screw extruders.Practical implicationsMix design proportion method via coefficient and slump value proposed by the authors is a relatively effective and convenient method; the rheological properties, printing process and geometry of a sample are the most significant factors that decide the success of the printing work.Social implicationsAdditive manufacturing, widely known as 3D printing, has recently drawn the attention of researchers worldwide for a few decades. Thanks to its capability to transform a drawing into an object, the idea of 3D printing has also attracted the attention of engineers, architects and investors.Originality/value(1) Mix design proportion via coefficient and slump value proposed by the authors is a relatively effective and convenient method that can be implemented simply at the laboratory or the site. (2) The ranges of coefficients by weight of the water, sand and PP fibers to binder are (0.27–0.3), (0.6–1.0) and around 0.3, respectively. The maximum sand size was smaller than 2.5 mm, and the small amount of PP fibers enhanced the quality and significantly reduced the printed samples' shrinkage. (3) The printability is affected by mix proportion and the relationship between nozzle printing speed parameter and extrusion speed of motor turning. (4) The chosen layer height recommended smaller than 0.83 times nozzle diameter is reasonable and improves adhesions and buildability. (5) The printing open time of the concrete mixture of (12–15) minutes is a barrel to promote 3D concrete printing technology and needs improvement.

Study on Preparation Method of 3D Printing Concrete Materiai

Research on the Preparation and Mechanical Properties of Solidified 3D Printed Concrete Materials

A critical review of preparation design and workability measurement of concrete material for largescale 3D printing

3D Concrete Printing: A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics

Evaluation Method of Shaping Performance of 3D Printing Concrete Material

3D printing concrete structures: State of the art, challenges, and opportunities

Development of 3D Printers for Concrete Structures: Mix Proportion Design Approach and Laboratory Testing

Preparation and High-Velocity Impact Experiment for Three-Dimensional-Printed Concrete

Strength and Proportioning Design of 3D Printed Concrete (3DPC) Based on Aggregate Gradation Optimization

Investigation of the material mixtures and fiber addition for 3D concrete printing

3D Printed Concrete: Fresh and Hardened Properties

State-of-the-art of Mechanical Properties of 3D Printed Concrete

Overview of the Development of 3D-Printing Concrete: A Review

Optimization of 3D printing concrete with coarse aggregate via proper mix design and printing process

PVA Fibre Reinforced High-Strength Cementitious Composite for 3D Printing: Mechanical Properties and Durability

Optimizing Concrete Mix Design for Application in 3D Printing Technology for the Construction Industry

Extrusion-based 3D Printing Concrete with Coarse Aggregate: Printability and Direction-Dependent Mechanical Performance

Microstructural characterization of 3D printed concrete

Mixing and extrusion of printing concrete

A review of 3D printed concrete: Performance requirements, testing measurements and mix design