Abstract:Reducing the amount of steel reinforcement in construction is imperative, driven by the objectives of reducing carbon emissions and mitigating steel corrosion. Among the various alternatives to steel reinforcement, basalt fiber reinforced polymer bar (BFRP) is considered a promising solution. The aim of this study is to examine the seismic performance of shear walls entirely reinforced with BFRP bars, utilizing BFRP for both longitudinal and transverse reinforcement. To address the inherent limitations of BFRP bars, a novel composite shear wall, incorporating BFRP bars, ultra-high-performance concrete (UHPC) and normal strength concrete, is proposed. Specifically, UHPC boundary elements are employed to strengthen the potential compression zone of BFRP reinforced shear walls. Four shear wall specimens, fully reinforced with BFRP bars, were fabricated and tested for their seismic performance, with two specimens incorporating UHPC boundary elements. Comprehensive test results, including failure modes, load-bearing capacity, ductility, energy dissipation, stiffness degradation and rebar strain, are presented and discussed. A detailed discussion of the effects of axial load ratio (ALR) and UHPC boundary elements is included. The test results indicate that the specimens featuring UHPC boundary elements showed significant improvements in deformability, lateral strength and energy dissipation capacity. This reveals that the integration of UHPC boundary elements considerably enhances the seismic performance of BFRP bar reinforced shear walls. Moreover, although all test specimens experienced failure due to concrete crushing in the compression zone, those with UHPC boundary elements manifested higher tensile strain on the BFRP bars on the tension side, facilitating more effective utilization of the high tensile strength of the BFRP bars. Ultimately, a method to ascertain the flexural capacity of BFRP bar reinforced shear walls, both with and without UHPC boundary elements, is proposed and validated by the test results.

Experimental study on seismic behavior of BFRP reinforced low strength rowlock wall

Experimental Study on Seismic Behavior of Steel Frame with Prefabricated Reinforced Concrete Infill Slit Shear Walls

Test Study on Seismic Behavior and Finite Element Analysis of Row Lock Wall Strengthened with HPFL

Seismic behavior of BFRP bar reinforced shear walls strengthened with ultra-high-performance concrete boundary elements

Quasi-static, Cyclic Loading Tests of RAC Brick Masonry Walls Strengthened by Basalt Textile Reinforced Concrete

Experimental Study of FRP-Reinforced Slotted RC Shear Walls under Cyclic Loading

Experimental Study of Masonry Walls Strengthened with Cfrp

MECHANICAL BEHAVIOR OF MASONRY WALLS STRENGTHENED WITH CFRP

Experimental Research on Shear Performance of Reinforced Block Short-Leg Masonry Shear Wall

Experimental study on seismic behaviors of concrete cross bore chain hollow block walls with construction column

Out-of-plane strengthening of URM walls using different fiber-reinforced materials

Experimental and Numerical Study on the Seismic Performance of Prefabricated Reinforced Masonry Shear Walls

Experimental Investigation On The Seismic Behavior Of Newly-Developed Precast Reinforced Concrete Block Masonry Shear Walls

Experimental and theoretical study on seismic behavior of a new UHPFRC sandwich wall and wall-wall joint

Experimental Study of Flexural Behavior of RC Beams Strengthening with BFRP Sheets

Experimental Study on the Seismic Behaviour of Reinforced Concrete Bridge Piers Strengthened by BFRP Sheets

Experimental Investigation of Seismic Behavior of a New Type Masonry Walls

Experimental study on the seismic performance of masonry wall reinforced by cement mortar and polypropylene band

EXPERIMENT AND APPLICATION OF ROWLOCK WALL STRENGTHENED WITH EXPANDED METAL LATH

Seismic Performance of SFRC Shear Walls with Window Opening and the Substitution Effect for Steel Bars

Seismic Behavior on Cross Bore Chain Block Dry Walls Confined Concrete Frame