EFFECTS OF RESIDUAL STRESS ON THE OVERALL STABILITY OF WELDED BOX COLUMNS UNDER AXIAL COMPRESSION

Liangliang FENG,Shidong NIE,Le SHEN,Ying HU,Bo YANG,Guoxin DAI

DOI: https://doi.org/10.13204/j.gyjz201710030

2017-01-01

Abstract:In order to investigate the effect of the residual stress on the overall buckling behavior of welded box columns, a series of finite element parametric analysis were conducted.The effects of residual stress with three different residual stress distribution models, six box-section dimensions and six kinds of yield strength from 235 MPa to 960 MPa were compared.The results showed that residual stress distribution models had a little effect on the overall buckling behavior.Further analysis was performed based on the rectangle residual stress distribution model. The results showed that when the columns were with a width-to-thickness ratio between 8 and 20 and with the thickness of plate less than 20 mm, the sectional dimensions had little effect on the stability performance of welded box-section columns if the residual stress was the same.The residual stress of columns with different yield strength had effects on the stability of the box columns, and the stability increased with the increasing of steel strength.The residual stress of cross-section had an obvious influence on the stability of members.