Abstract:Previous studies showed that opening windows could help with kitchen ventilation in pollutant removal. However, no studies have systematically examined the impacts of window positions on kitchen hood performance, and there is insufficient information on indoor airflow characteristics and pollutant distribution from makeup air through open windows. Therefore, the objective of this study was to use a validated computational fluid dynamics approach with CO2 as an indoor air quality indicator (a surrogate for cooking emissions) to understand the impacts of exhaust flow rate and the window opening position on the flow characteristics, concentration distribution, and capture efficiency (CE) of the hood. We conducted four‐point validation tests of the numerical models based on CO2 concentration and temperature measurements under steady‐state conditions. The validated models were subsequently used in simulations to understand the effects of six different window opening positions and the two exhaust flow rates on exposure. We found that the CO2 concentration could be better reduced by having windows open at the higher location. Generally, the front windows were more effective with CE > 80%, followed by the back and the side windows, respectively. We also found that as the exhaust flow rate increased from 6.72 to 12.16 m3/min, CE reached >75% for all window positions, where the most significant increase was 1.58 times for the lower side window. To sum up, changing the relative position of the window and the exhaust hood could help disperse the incoming airflow from the window, improve the kitchen's overall ventilation, and reduce pollutant concentration.

Effect of Horizontal Sash Opening on the Performance of Fume Hood

Experimental Study on Performance of Fume Hood with Obstacle Located Inside

Requirement and testing of face velocity of fume hoods in laboratories

Experiment Research of Effect of Obstacles on Performance of Fume Hood

Determination of Critical Air Ratio and Performance Study of a New Air Curtain Fume Hood

CFD Study on Gaseous Pollutant Transmission Characteristics under Different Ventilation Strategies in a Typical Chemical Laboratory

Investigation on Improving Fume Hood Performance Via Elimination of Internal Vortices: Experiments and CFD

Intelligent Simulation Experimental Study on Influence of Air Velocity of Air Supply Hood and Exhaust Hood with Vertical Push-Pull Ventilation.

An Experimental Investigation of the Fire-Induced Oscillatory Vent Flow Through a Horizontal Opening

Effects of Window Position and Exhaust Flow Rate on Residential Kitchen Hood Performance: A Validated Numerical Approach

Numerical simulation for optimum face velocity range of recirculation filtration fume hood

Center-Line Velocity Change Regime in a Parallel-Flow Square Exhaust Hood

The effect of the thermal plume generated by body heat dissipation on the containment of fume hood

EXPERIMENTAL AND SIMULATION STUDY ON THE INFLUENCE OF SMOKE VENT ARRANGEMENT ON SMOKE CONTROL EFFECT IN SUBWAY STATION

Numerical Simulation on Performance of Two Fume Hoods Which Both Run at the Same Time in Laboratory

Experimental investigation on drag effect of sprinkler spray to adjacent horizontal natural smoke venting

Reduced-scale Experimental Investigation on Ventilation Performance of a Local Exhaust Hood in an Industrial Plant

Studying of Recirculatory Filtration Fume Hood＇s Effects on Indoor Environment

Performance of Constant Exhaust Ventilation for Removal of Transient High-Temperature Contaminated Airflows and Ventilation-Performance Comparison Between Two Local Exhaust Hoods

Development and characterization of an inclined air-curtain (IAC) fume hood

Experimental and Theoretical Study on the Characteristics of the Spill Plume in a Compartment Fire with High-Low Opposing Openings