Investigation of ultimate bearing capacity of shield tunnel based on concrete damage model
Jianwen Liu,Chenghua Shi,Chenjie Gong,Mingfeng Lei,Zuxian Wang,Zhu Peng,Chengyong Cao
DOI: https://doi.org/10.1016/j.tust.2022.104510
IF: 6.9
2022-07-01
Tunnelling and Underground Space Technology
Abstract:Shield tunnel is usually treated as an underground permanent facility with a design service life of 100 years, its bearing capacity and service performance has attracted extensive attention. Previous studies on the mechanical behavior of shield tunnel are mostly carried out within the framework of elastic or elastoplastic theories. However, when these theories are used to explore the ultimate bearing capacity of shield tunnels, large structural deformation is bound to occur, which leads to crack or damage development and finally structural failure. Therefore, to analyze the damage and failure of shield tunnels, the damage and deterioration characteristics of concrete materials should be considered. Also, the damage mechanics theory is more appropriate to deal with this problem. In this paper, a damage–based analysis method for investigating the ultimate bearing capacity of shield tunnels is proposed. A bi–scalar elastoplastic damage constitutive model based on energy–based stress decomposition is introduced to describe the damage and deterioration behavior of concrete materials. Then, an elaborate numerical model of shield tunnel is developed based on the 3D discontinuous contact model. Moreover, the validity of the proposed method is verified by comparing the simulations with the full–scale experimental results. Then, the ultimate bearing capacity and damage characteristics of shield tunnels in practical underground service conditions are discussed. It is found that the numerical results are generally in good agreement with the experimental data, so that the proposed model can effectively reflect the characteristics of structural deformation, internal force transfer, damage evolution process, failure mode and stress redistribution in the loading process. Also, it is found that the failure process of the tunnel structure can be divided into linear elastic phase, yield–damage phase and failure phase. The range of each phase depends on the loading conditions and surrounding soil constraints. In addition, the integrated stiffness and bearing capacity of the tunnel–soil coupled structure increase with the increase of soil elastic modulus and lateral coefficient of earth pressure. The increase of coupled structural stiffness will also shorten the yield–damage phase and decrease the structural toughness (or ductility). The failure modes of the shield tunnel structure are manifested by the bolt yielding, concrete cracking, and finally, the forming joint plastic hinges on the tunnel crown and waist joints.
construction & building technology,engineering, civil