Abstract:As a promising treatment technology for wastewater, the promotion of membrane bioreactors (MBR) is restricted by biological fouling. Among the measures used to mitigate membrane fouling, the addition of powdered activated carbon (PAC) to MBRs has been recognized as an effective practice. However, the effects of PAC dosage on the performance of MBRs that treat highly biochemical influent from wastewater treatment plants remain unclear. In this study, by investigating the treatment of biochemical tailwater by PAC–MBRs, we thoroughly analyzed the effects of PAC dosage on the contamination removal efficiency, membrane operation cycles, sludge mixture properties, and microorganism distributions. The results indicated that the addition of PAC enhanced the removal efficiency of MBRs depending on the contaminant of interest. For example, the removal efficiency of total nitrogen can be boosted from 30 % to 60 % with PAC addition, while the removal efficiencies of total phosphorus were comparable with or without PAC addition. Furthermore, the application of PAC in MBRs can prolong the duration of membranes by suppressing biological fouling. This was supported by the decreased microbial products, reduced smaller solid particles, and stronger stability of sludge particles. PAC addition also boosts the proportion of Proteus and decreases the proportion of Bacteroides , which helps to improve the removal efficiencies of contaminants. Finally, among the PAC dosages tested in our study, 1.5 g/L PAC was proposed as the optimal candidate for treating highly biochemical influents. For example, the corresponding time for transmembrane pressure to reach 0.03 MPa was 19 d at 1.5 g/L PAC, while these periods were 7 and 14 d at dosages of 0 and 0.5 g/L, respectively. Overall, the findings of this study will aid in the selection of optimal dosages for other systems with different types of influents.

Study on the Operating Characteristics Between AS-SMBR and BPAC-SMBR Systems

Influence of Powdered Activated Carbon Addition on SMBR Filtration Performance

Comparison of the Filtration Characteristics Between Biological Powdered Activated Carbon Sludge and Activated Sludge in Submerged Membrane Bioreactors

A Comparative Study of PAC-MBR and BPAC-UF Process on Treatment of Micro-Polluted Raw Water

Optimization of membrane bioreactors by the addition of powdered activated carbon.

Effect of powdered activated carbon dosage on sludge properties and membrane bioreactor performance in a hybrid MBR-PAC system

Study on the Influence Factors of MBR-PAC System

Effect of Powder Activated Carbon (pac) Addition on the Performance of Anaerobic Dynamic Membrane Bioreactor (andmbr): Stratification Analysis of Dynamic Membrane Characteristics

Effect of Dosing Powdered Activated Carbon on Operational Performances of MBR

Effects of powdered activated carbon dosage on the performance of membrane bioreactors treating biochemical tail water

Effect of PAC Dosage in a Pilot-Scale PAC-MBR Treating Micro-Polluted Surface Water.

Powdered Activated Carbon – Membrane Bioreactor Operated under Intermittent Aeration and Short Sludge Retention Times for Micro-Polluted Surface Water Treatment

The Performance of Hybrid Anaerobic Membrane Bioreactors (AnMBRs) Added with Powdered Activated Carbon (PAC) Based on Different Sludge Retention Times

Pilot-scale Study on PAC/MBR for Treatment of Micro-polluted Surface Water

THE COMPARATIVE RESEARCH ON PAC/MBR AND MBR FOR TREATING MICRO-POLLUTED SURFACE WATER

Study on PAC -Self-forming Dynamic Membrane Bioreactor for Domestic Sewage Treatment

Influences of Sludge Retention Time on Sludge Properties and Membrane Fouling of Submerged Membrane Bioreactor with the Addition of Ca2+

Powdered Activated Carbon - Membrane Bioreactor (PAC-MBR): Impacts of High PAC Concentration on Micropollutant Removal and Microbial Communities

Mechanisms of Fouling Control in Membrane Bioreactors by the Addition of Powdered Activated Carbon

Effect and Mechanism of Reduced Membrane Bioreactor Fouling by Powdered Activated Carbon

Comparing Powdered and Granular Activated Carbon Addition on Membrane Fouling Control Through Evaluating the Impacts on Mixed Liquor and Cake Layer Properties in Anaerobic Membrane Bioreactors